This module is an affordable device that provides users with smart home control. It is a WiFi-based wireless switch that can connect to a wide range of appliances. It transmits data to a cloud platform through the WiFi router, which enables users to remotely control all the connected appliances via the mobile application eWeLink.
This module makes all home appliances smart. As long as the mobile has a network, users can remotely control the appliances from anywhere at any time. Another feature available is to set timing schedules for the appliances, which can include scheduled on/off, and help users to maintain an easy life.
It supports to connect and control one home appliances,which can turned on/off by app eWeLink. It works in self-locking mode. In self-locking mode, users can turn on/off the 1 connected devices independently.
TH-16 is a wireless temperature monitoring switch which can remotely monitor and set temperature range to turn on/off connected appliances through the iOS/Android APP eWeLink. Just as the name indicates, the TH-16 temperature monitor device supports maximum current supply specifications: 16A.
TH-16 remote temperature monitor and WiFi switch supports presetting the range for temperature. When the temperature of your home environment falls within the range, it will automatically turn on or off the connected devices.
1>.Real-time temperature monitoring
2>.Remote intelligent control
3>.With a casing
4>.Support power supply output
5>.Support 16A high current load
6>.Support 8 groups control modes
7>.Ultra high monitoring accuracy
8>.Supports status tracking, home appliances status timely feedback to App
9>.Support share control
10>.Support IOS and Android
11>.Easy installation, easy handling and can be activated immediately and stably
12>.APP supports multiple languages
13>.Support power supply output
Product Name:TH-16 DS18B20 Temperature Monitor
Working voltage: AC 85~250V
Load voltage: AC 85-250V
WIFI standard:2.4GHz b/g/n
1>.Measure Temperature Range:-55℃~125℃
2>.Power Supply: 3.0-5.5V DC (5V recommended)
Users can preset repeat or single timing schedules to turn on/off devices according to your needs. Imagine that the light is off in the evening (10:00 pm) and on in the morning (7:00 am) every day automatically.
A countdown timer allows users to turn on/off a device at a countdown time. This feature supports up to 24 hours countdown time. It can be widely applied to devices with battery for charging. Just imagine you have your mobile phone stopped charging after 3 hours countdown time.
eWelink is the first smart home APP in domestic market to release the powerful loop timing function. A loop timer allows users to turn on/off a device at preset intervals and run for a specified time. With a loop timer, you can make a device launch every 30 minutes and last for 10 minutes each time.
It allows users to assign all added devices to different groups so that they can easily check and manage the devices. To use this feature, simply click the drop-down menu on the top of device list.
Create a group named ‘My Study Room’, and add all the home appliances in the study room into the group for convenient management.
The smart scene allows users to use one device to automatically trigger ON/OFF one or more devices.
So you can create two scenes named ‘Return Home’ and ‘Leave Home’. As soon as you arrive or leave home, the door is open/closed, lights or other home appliances are automatically turned on/off.
Device owners can share control of their own devices to other eWeLink users. Invite your family members to control your smart home together!
Tap on ‘SHARE’ and enter the eWeLink ID you want to share with (either phone number or email address), make sure the person is also online. Once the invitation message is confirmed, he/she will have right to control your devices.
Controlled by APP.Turn electrical devices on/off from anywhere.It can work without TH sensor.
Real-time monitoring temperature.At the same time, the temperature range can be set. For example, if the temperature is lower than 10℃,the heating device can be turned on automatically; if the temperature is higher than 30℃, the cooling device is turned on automatically.
User can also turn OFF automatic control mode and then control by press button on APP.
It just can work on self-locking mode:
For example, if users turn on, connected device keeps on. If users turn off, connected device keeps off.
For example:Press button,relay will keep on;Press again,relay OFF.
1>.APP eWelink intelligent control in Auto mode. It need set temperature Min/Max value at APP. The module automatically controls the device based on the value of the set value.
2>.APP eWelink intelligent control in Manual mode.Users can control the device without connecting sensors.It need press button on APP to turn ON/OFF device.
3>.Button control mode. Doesn't need APP and sensor at this mode. It just need press button ‘SET’ to turn ON/OFF device directly.
8.APP eWelink intelligent control:
1>.Module can be control by APP intelligent control.
2>.It can Add/Sharing/delete device,setting delay,APP remote control,get work status and so on.
Step 1:Install and register APP eWelink, select the appropriate language.Use can get APP for ‘APP Store’ or ‘Google Play’ or eWelink Official website.
Step 2:Connect AC 85~250V power supply on ‘L’ and ‘N’ at input terminal.(Note:Please don’t connect to load before pairing and test.)
Step 3:Make sure module in the range of WIFI and phone connect to the same WIFI router.
Step 4:Open APP eWelink.
Step 5:Keep press the set button on TH-16 for more than 7 seconds.When the LED indicator starts to flash and then Click ‘Add Device’.
Step 6:Select ‘Touch’ on APP(recommended).Users can also choose AP mode.
Step 7:Input WIFI name and password which phone is connect.
Step 8:Waiting and configuring about 3minute.
Step 9:If the pairing fails,please try it several times(remove power supply).
Step 10:Reset the module device name after connection successfully.
Step 11:Test and set module.
Step 1:Make sure already paired successfully between module and APP.
Step 2:Make sure module in the range of WIFI which has paired.
Step 3:Make sure phone have connect to WIFI/4G/3G/2G.Any one the internet.It means phone no need connect to WIFI after paired successfully.
Step 4:Connect to Load at output terminal.
Step 5:Connect DS18B20 sensor.
Step 6:Set Auto or Manual control at APP.Auto control need set Min and Max temperature.Manual control just press button directly.
Step 7:Selective setting Share/Schedule/Timer/Loop timer if need these functions.
Step 8:Connect AC 85~250V power supply on ‘L’ and ‘N’ at input terminal.
Step 9:Using and control module.
1>.Module can be control by button ‘SET’ on module without pair with WIFI.
Step 1:Connect AC 85~250V power supply on ‘L’ and ‘N’.(Note:Please don’t connect to load before select work mode and test.)
Step 2:Test.E.g press button ‘SET’,then output relay will turn ON,and output LED indicator will turn ON at the same time.
Step 3:Remove power supply and then connect to Load at output terminal.
1>.It can output voltage so module can connect to load directly!
2>.At first time when pairing, the phone must be connected to WIFI from router. No need to connect to WIFI after pairing success.
3>.Its power supply is AC and can not provide voltage from DC.
4>.It does not support Local Area Network (LAN).
11.Frequently Asked Questions:
1>.Why does the relay start working automatically after the power is turned ON?
Q:Poor contact, please remove power supply and reconnect more than once.
2>.Why can't pair successfully?
Q:Please make sure module in the range of WIFI from router. First, the phone should connect to the same WIFI. Second, you need try more than once.
3>.Can it get work status?
Q:Yes, APP can get work status.
4>.Why does APP display OFF and module cannot be controlled after the pairing is successful?
Q:Module need inside setting after pairing successful about 1-2 minutes. Then check with ‘WIFI indicator status description’ to find reason. Check if your router sets the filtering MAC address. Delete device and re-pair. Use 2.4G router and don’t use others.
5>.Why can not add device?
Q:Close WIFI on phone and waiting for more than 10 minutes.Then re-start module and re-connect WIFI. Keep module close to router.
1pcs TH-16 Temperature Monitor;
1pcs DS18B20 Sensor;
1. Yanwen / YunExpress / 4PX / China Post Airmail Service
(1) Due to the high risk of package lost recently, we have to stop using the free shipping way these days. Hope for your kind understanding! And the $5 is for tracking number and delivery insurance ^0^ Enjoy order from us.
Free Shipping for all orders over $20 ^0^ (with free tracking number and delivery insurance fee)
(2) Shipping time
Shipping time is 7-20 business days to most of countries; please view below table for exactly shipping time to your location.
7-15 working days to: Most of Asia countries
10-16 working days to: USA , Canada , Australia , UK , Most of Europe countries
13-20 working days to: Germany , Russia
18-25 working days to: France , Italy , Spain , South Africa
20-45 working days to: Brazil , Most of South America countries
2. DHL/FedEx Express
(1)Shipping Fee: Free for the order which meet the following requirements
Total price of the order >= 200USD or Total weight of the order >= 2.2KG
When the order meets to one of the above requirement, it will be shipped for FREE via EMS/DHL/UPS Express to below country.
Asia: Japan , South Korea , Mongolia . Malaysia , Singapore , Thailand , Vietnam , Cambodia , Indonesia , Philippines
Oceania: Australia , New Zealand , Papua New Guinea
Europe& America: Belgium, Britain, Denmark, Finland, Greece, Ireland, Italy, Luxembourg, Malta, Norway, Portugal, Switzerland, Germany, Sweden, France, Spain, USA, Austria, Canada
Note: Shipping Fee to other countries, please contact email@example.com
(2) Shipping Time & Delivery Time
Shipping time: 1-3 days
Delivery time: 5-10 working days (about 1-2 weeks) to most of countries.
Because the package would be returned to the sender if it had not been signed by the receiver , please pay attention to the arriving time of the package.
1) APO and PO Box Addresses
We strongly recommend that you provide a physical address for order delivery.
Because that DHL and FedEx are unable to deliver items to APO or PO BOX addresses.
2) Contact Phone Number
Receivers' contact phone number is required by express shipping agency for the package delivery. Please provide us with your latest phone number.
1) Delivery Time of mixed orders with items in different Shipping Status should be calculated using the longest estimate times listed.
2) Chinese Holiday Reminder: During annual Chinese holidays, services from certain suppliers and carriers may be affected, and delivery for orders placed around the following times may be delayed by 3 - 7 days: Chinese New Year; Chinese National Day,etc.
3) Once your order is shipped, you will receive an email notification from icstation.com
4) Track the order which with tracking number via below links: