Home > Function Module > Ultrasonic Module > 3V-5.5V RCWL-1603 Ultrasonic Module Distance Measuring Transducer Sensor for Arduino UART PWM GPIO Output w/ Temperature Compensation High Precision

3V-5.5V RCWL-1603 Ultrasonic Module Distance Measuring Transducer Sensor for Arduino UART PWM GPIO Output w/ Temperature Compensation High Precision

13160
5 9
$4.99 $3.49 (only 0 pcs )
Contact us for wholesale price
Time Remaining:

Sold out


Description:
The RCWL-1603 is an open ultrasonic ranging module with 3V-5.5V power supply. It contains a variety of working modes including UART, GPIO, PWM and UART AUTO OUT. Its temperature supplement adopts MCP9700 professional temperature measuring chip.

Features:
1>. 3V-5.5V wide voltage power supply.
2>. Ultra-wide measurement range of 2cm-500cm (measurement of flat wall).
3>. UART, GPIO, PWM and UART AUTO OUT.
4>. Provide temperature output (UART mode only).
5>. Standby mode (UART mode only).
6>. Temperature compensation.
7>. The SWIM interface of STM8S003 is set aside for module up grade.
8>. Lead-free process.
9>. Adopt the general environmental protection probe, can customize the use of high - quality reinforced environmental probe.
10>. Working temperature: -20 Celsius to 90 Celsius

Parameters:

No. Parameter Remark Min. value typical value Max. value Unit
1 Working voltage   3   5.5 V
2 3.3V working current     11 12 mA
3 5V working current     10 11 mA
4 Maximum detection range Flat wall 400 500 800 CM
5 Working frequency     40   KHz
6 Blind area     2 3 CM
7 Detection accuracy     士 2   %
8 Resolution     1   mm
9 Detection Angle Maximum directional Angle   ±15   Degree
10 Output interface mode   UART/GPIO/PWM/UART AUTO OUT.  
11 Working temperature Plastic shell probe (to be customized) -20   60
12 Working temperature Aluminum shell probe -20   90


Pin Definition:

No. Pin Description
1 Vcc 3.3V-5V power supply
2 Trig
RX
The GPIO mode is Trig, trigger signal.
The UART/UART AUTO OUT mode is serial port RX.
3 Echo
RX
The GPI0 mode is Echo, feedback signal.
The UART/UART AUTO OUT mode is serial port RX.
4 Gnd Ground
5 Swim Swim pin of the STM8S003
6 MD/PWM MD: Mode selection
Before power on, the module is connected to ground, and then enter into setting mode after power on;
Before power on, the module suspends, and then enter into working mode after power on.
7 Gnd Ground
8 Rst STM8S003 reset pin


Mode Setting Operation:

Mode setting command:

No. Command value Return value Description
1 0X01 0XA1 Serial Port Mode
2 0X02 0XA2 GPI0 mode, the same as HC-SR04
3 0X03 0XA3 PWM output mode
4 0X04 0XA4 Automatic serial port output
5 0X0F Version Output version

Setting pin: MD/PWM
Baud rate: 9600 N 1

Operation:
    -- set the serial port mode
1>. MD/PD is connected to ground, can be connected with the ground foot.
2>. Power on.
3>. The baud rate of the PC terminal serial port is set to: 9600 uncheckbit 1 bit stop bit.
4>. Enter command value 0X01.
5>. The serial software will receive the set successful data 0XA1.
6>. Module setting is completed.

Model Definition:
1>. Serial port mode:
The serial port is connected with the module and input different commands to measure distance and temperature parameters.
Serial port mode command:

No. Command value Return value Description
1 0XC1 Distance value BYTE1+BYTE2 Hexadecimal distance value, BYTE is high pin
2 0XC2 Temperature BYTE1 Decimal temperature value
3 0XC3 0XC3 Ranging part, power off
4 0XC4 0XC4 Ranging part, power on

Operation:
--Test distance
A>. MD/PD pin suspends
B>. Module is powered on    
C>. The baud rate is set to: 9600, no check digit, and 1 stop bit.
D>. Enter the command value and enter 0XC1.
E>. Serial software will receive data, such as 06,0C; the test distance is 1548mm.
--Test Temperature
A>. MD/PD pin suspends
B>. Module is powered on    
C>. The baud rate is set to: 9600, no check digit, and 1 stop bit.
D>. Enter the command value and enter 0XC2.
E>. Serial software will receive data, such as 12; the test temperature is 12 Celsius.

2>. GPIO mode:
Consistent with HC-SR04 operation.Fully compatible with HC-SR04 command.

3>. PWM mode:
MD/PWM pin output with distance equal to the space ratio signal.

4>. AUTO GPIO mode:
The serial port always outputs the measured distance value, which is generally used for test modules.

5>. Version:
Serial port output version signal.

Differences:
(HC-SR04 & RCWL-1601 & RCWL-1603)
Picture One:
      

      

Picture Two:

 

1. Tested by ICStation's Outstanding Partner Lucid Dev Team:

(The language in the video is English)

There are currently no product reviews.

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 



We are PayPal Verified 

 

2)  Bank Transfer / Wire Transfer / T/T

 

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.

Customers who bought this product also purchased

DHT11 Temperature Module and Humidity Shiled Board Temp Sensor Module for ESP8266 ESP-01/ ESP-01S
$3.49
$4.99
31
CSRA64215 4.0 4.2 Bluetooth-compatible Module HIFI Digital Amplifier Module PCM5102A Low Power APTXLL Lossless Compression I2S Wireless Board
$18.19
$25.99
30
D2-6 Bluetooth-Compatible Remote Control Smart Car Intelligent Robot Tracking Car Obstacle Avoidance Motor DIY Kits Tracking Smart Car
$7.00
$13.99
50
Wireless MP3 Decoder Board TF Card Micro USB Lossless Decoding Stereo Audio Player Module for Car Amplifier
$4.89
$6.99
31
DC 12V isolated APT-X CSR8645 Lossless Music Hifi Bluetooth-compatible 4.1 Receiver Board Amplifier Module for Audio Car Amplifier Speaker
$11.89
$16.99
30
TEC4056 18650 Charger Module 4.2V Lithium Battery Charger Charging Module TP4056
$2.79
$3.99
30
DC to DC High Power Step Down Buck Converter Adjustable Power Supply Module 12A DC 5-40V to DC 1.2-36V
$6.29
$8.99
30
TPA3116D2 50W+50W Class D Amplifier Dual Channel Stereo Audio Digital Power Amplifier Board 2x50W Adjustable Volume
$11.19
$15.99
31
4S 10A 14.8V 16.8V 18650 Li-ion Lithium Battery Charger BMS Protection PCB Board
$3.49
$4.99

Sold Out

31
Voice Playback Module MP3 Sound Module Music Player Voice Broadcast Device Development Board for Arduino
$7.69
$10.99
31
10PCS TTP223 Capacitive Touch Switch Touching Button Key Switch Module Self-Locking/No-Locking Module for Arduino
$2.00
$3.99
50
Mini DC 5A Motor PWM Speed Controller Module 6V-30V Speed Control Switch LED Dimmer
$1.79
$2.99
40

Your Recent History

3V-5.5V RCWL-1603 Ultrasonic Module Distance Measuring Transducer Sensor for Arduino UART PWM GPIO Output w/ Temperature Compensation High Precision
$3.49
$4.99

Sold Out

31