VARIOUS FUNCTIONS: The stepper motor controller can adjust the angle, speed, direction and delay time of the motor. The micro stepping resolution can reach 1/128, enabling you to control the motor more accurately.
9 OPERATING STATES: The stepping motor controller has 9 built-in fixed working modes, including forward rotation, reverse rotation, delay, cycle, etc., so you can select the working mode more quickly. In addition to the built-in parameter working mode, you can also control through external buttons or other drives.
HD LCD DISPLAY: This stepper motor controller has a HD LCD display, so you can read the parameters very easily and set various parameters more precisely. The module also has a power failure memory function to prevent your parameters from being lost.
FORWARD AND REVERSE ROTATION: The stepper motor controller can change the direction of motor rotation by pressing a button, and you can also select two modes, automatic or manual, by selecting the working mode, which is more widely used.
13 KINDS OF MENU SETTING FUNCTIONS: The stepper motor controller including cycle number, motor turns, delay time, number of pulses, forward speed, flip speed, etc. The external buttons and knob encoder make it very easy to set the parameters.
1>.Product name:ZK-SMC01 CNC Stepper Motor Controller
2>.Input voltage:DC 5V-30V
3>.Control shafts:Single axis
4>.Suitable motor:42/57 step motor(Nema17/23 motor)
6>.Forward pulses number:1-9999999
7>.Reverse pulses number:1-9999999
9>.Forward delay time:0.0-999.9s
10>.Reverse delay time:0.0-999.9s
12>.Acceleration and deceleration control:Yes
13>.Input reverse polarity protection:Yes
3.1. On the operation interface, rotate the encoder to adjust the speed, CW key -- forward rotation, CCW key -- reverse rotation, RUN/STOP key -- operation stop exit.
3.2. Press and hold the encoder to enter the menu setting.
3.3. On the menu setting interface, rotate the encoder to adjust and change the parameter codes F-01~F-13.
3.4. Long press the encoder, save the parameters and exit to enter the operation interface.
3.5. On the menu setting interface, briefly press the encoder to enter the parameter setting state of F-XX corresponding menu, the parameter flashes, and then briefly press Shift to rotate the encoder to adjust the parameter.
3.6. Press the RUN/STOP key briefly to exit the parameter setting and return to the number adjustment interface of the main menu.
First we should say that ICStation doesn't accept any form of pay on delivery.Items used to be shipped after receiving the order info and payment. Below are the payment methods we can accept at the moment:
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$500. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.
For other payment method, please contact us at firstname.lastname@example.org for more details.