Home > Function Module > LED Display Module > DC 3.3V 5V MAX7219 Digital Tube 8-Digit 0.36 Inch Red LED Display Module

DC 3.3V 5V MAX7219 Digital Tube 8-Digit 0.36 Inch Red LED Display Module

GY20209
5 9
$11.99 $8.39
Contact us for wholesale price
Time Remaining:
- OR - - OR - Add to Wish List

1.Description:
  It is a MAX7219 digital tube display module.MAX7219 is an integrated serial input/output common-cathode display driver.It connects a microprocessor and an 8-digit 7-segment digital LED display.It can also connect to a bar graph display or 64 independent LEDs.It includes an on-chip B-type BCD encoder,multiple scan loops,segment word drivers,and an 8*8 static RAM to store each data.There is only one external register used to set the segment current of each LED.

2.Feature:
  1).A convenient four-wire serial interface can be connected to all general-purpose microprocessors.Each data can be addressed without rewriting all the displays when updating.MAX7219 also allows users to select encoding or not encoding for each data.
  2).The entire device includes a 150μA low-power shutdown mode,analog and digital brightness control,a scan limit register allowing users to display 1-8 bits of data,and a detection mode that allows all LEDs to emit light.
  3).Only 3 IO ports are required to drive 8-bit digital tubes,and the digital tubes will not flicker when displayed,and support cascading.
  4).The digital tube is connected with the PCB board with a 2.54mm pitch round hole pin header,which can easily replace the digital tube.
  5).The four corners of the PCB board are fixed with copper studs,which can effectively prevent accidents such as short circuits.

3.Parameter:
  1).Product Name:MAX7219 Digital Tube Display Module
  2).Input Voltage:DC 3.3V/5V
  3).Digital Tube Size:0.36 inch
  4).Display Color:red
  5).Display Number:1-8 digits data
  6).Work Temperature:-25℃~85℃
  7).Work Humidity:5%~95%RH
  8).Size:85*15*13mm

4.Note:
  1).Don't connect VCC and GND reversely,so as not to burn the chip.
  2).51 The P0 port of the single-chip microcomputer needs to be connected with a pull-up resistor.If your single-chip microcomputer is not connected with a pull-up resistor,you can connect the data line to other ports.

5.Package:
  1).1pcs MAX7219 Digital Tube Display Module
  2).1pcs 6-Pin Straight Pin
  3).1pcs 5-Pin Looper





 

There are currently no product reviews.

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 



We are PayPal Verified 

 

2)  Bank Transfer / Wire Transfer / T/T

 

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.

Your Recent History

DC 3.3V 5V MAX7219 Digital Tube 8-Digit 0.36 Inch Red LED Display Module
$8.39
$11.99
30