1.Description:
  It is a step-down charging module. It supports the conversion of input voltage DC 6V-26V into DC 5.2V.Supports regulated output.

2.Feature:
  1).It is compatible with a variety of mobile phone models.
  2).It has a working indicator,you can see the working status of the module at a glance.
  3).It has two USB output ports.
  4).It supports 3A high current output.

3.Parameter:
  1).Product Name:Step-Down Charging Module
  2).Input Voltage:DC 6V-26V
  3).Output Voltage:DC 5V
  4).Output Current:3A(Without a heat sink,the stable output current is 2A)
  5).Work Temperature:-25℃~85℃
  6).Work Humidity:5%~95%RH
  7).Size:28*33*8mm

4.Note:
  1).The positive and negative poles cannot be reversed,and the input voltage cannot exceed 26V,otherwise the chip will be damaged.
  2).Do not touch the sampling resistors and IC pins on the circuit board with your hands when powering on,otherwise it may cause sudden changes in the output voltage and damage the equipment.
  3).The nominal 3A current will not burn the phone to burn the device.The actual charging current is determined by the phone or device.The charging current of most mobile phones is 0.8-1.5A.

5.Package:
  5pcs Step-Down Charging Module