DC 12V Battery Charging Monitor Overcharge Controller Battery Voltage Protector
$6.99$9.9930%
00d : 00h : 00m : 00s
Item ID: GY20586
Product Details
1.Description:
It is a battery charging control board.When the battery voltage is lower than the set undervoltage value,the controller will automatically turn on the power supply to charge the battery;when the battery voltage is higher than the starting value,the module will automatically disconnect the power supply to charge the battery.
2.Feature:
1).Its undervoltage and overvoltage values ??can be adjusted.
2).It has a digital display that can show the voltage of the battery.
3).It has a memory save function,which can remember the last set value.
4).It has an input indicator.
3.Parameter:
1).Product Name:Battery Charging Control Board
2).Input Voltage:DC 10V-16V
3).Load Power:20A relay
4).Wiring Method:BAT is connected to the charger, OUT is connected to the load
5).Answer Size:82*42mm
6).Mounting Hole Diameter:3mm
7).Work Temperature:-25℃~85℃
8).Work Humidity:5%~95%RH
9).Size:110*47*24mm
4.Setting instructions:
1).Undervoltage value adjustment instructions:
1.1).View the current parameters:Press the J1 button to display the currently set undervoltage parameter value (charging start value).
1.2).Set the undervoltage parameter:Press and hold the J1 button until the digital tube flashes,and use J1 and J2 to adjust the undervoltage parameter value.
2).Instructions for overvoltage adjustment:
2.1).View the current parameters:Press the J2 button to display the currently set overvoltage parameter value (charging stop value).
2.2).Set the overvoltage parameter:long press the J2 button until the digital tube flashes,and use J1 and J2 to adjust the overvoltage parameter value.
5.Installation steps:
1).Align the circuit board with the panel and install 4 screws.
2).Put the product into the device you have drilled and install 2 fixing screws.
3).Paste the panel film.
6.Package:
1).1pcs Battery Charging Control Board
2).1pcs mounting panel
3).1pcs panel film
4).4pcs mounting screws
5).2pcs fixing screw
6).2pcs Nut