- prev
- next
DC 12V Battery Overdischarge Monitor 20A Under Voltage Controller Battery Voltage Protector
$8.99$9.9910%
00d : 00h : 00m : 00s
Item ID: GY20585
Product Details
1.Description:
It is a battery overdischarge protection module.It can set the undervoltage and overvoltage values.When the battery voltage is lower than the undervoltage value or higher than the overvoltage value,the module will automatically respond to protect the battery from undervoltage and overdischarge.
2.Feature:
1).Its undervoltage and overvoltage values can be adjusted.
2).It has the function of memory saving,saving the set undervoltage and overvoltage values.
3).It comes with circuit board and mounting panel,you can install it by yourself.
4).It works with 12V battery.
5).It has a digital display that can show the voltage of the battery.
3.Parameter:
1).Product Name:Battery Overdischarge Protection Module
2).Input Voltage:DC 10V-15V (12V battery)
3).Load Power:20A relay
4).Installation Size:82*42mm
5).Work Temperature:-25℃~85℃
6).Work Humidity:5%~95%RH
7).Size:110*47*24mm
4.Setting Instructions:
1).Undervoltage value adjustment description:(load stop)
1.1).View the current parameters:Press the J1 button to display the currently set undervoltage parameter value.
1.2).Set the undervoltage parameter:Press and hold the J1 button until the digital tube flashes,and use J1 and J2 to adjust the undervoltage parameter value.
1.3).When the battery voltage is lower than the undervoltage value,the module automatically disconnects the connection from the load.
2).Overvoltage value adjustment instructions:(load start)
2.1).View the current parameters:Press the J2 button to display the currently set overvoltage parameter value.
2.2).Set the startup parameters:long press the J2 button until the digital tube flashes,and use J1 and J2 to adjust the overvoltage parameter value.
2.3).When the battery voltage is higher than the overvoltage value,the module automatically connects to the load.
5.Installation steps:
1).Align the circuit board with the panel and install 4 screws.
2).Put the product into the device you have drilled and install 2 fixing screws.
3).Paste the panel film.
6.Package:
1).1pcs battery over-discharge protection module
2).1pcs mounting panel
3).1pcs panel film
4).4pcs mounting screws
5).2pcs fixing screw
6).2pcs Nut
