1.Description:
  It is a AB phase Hall encoder. The AB-phase Hall encoder is a high-performance, low-cost, dual-channel incremental Hall encoder, suitable for a variety of harsh environments.

Each encoder contains a pulse magnetic ring and two Hall sensors,and outputs two The channel quadrature phase angle is 90° square wave, the board and the motor tail electrode are welded and fixed,and the magnetic ring can be sleeved on the rear shaft of the motor.

2.Feature:
  1).The encoder has many advantages such as fast response speed,strong shock resistance,long transmission distance,etc.It has high reliability and long service life in harsh environments.
  2).The AB-phase Hall encoder has a connecting line, which is convenient to connect.
  3).The magnetic Hall encoder is compact, powerful and cost-effective.

3.Parameter:
  1).Product Name:AB Phase Hall Encoder
  2).Pulse:11ppr
  3).Output:AB phase square wave
  4).Interface Type:PH2.0-6P
  5).Magnetic Ring Triggering series:22 (11 pairs)
  6).Work Temperature:-25℃~85℃
  7).Work Humidity:5%~95%RH
  8).Magnetic ring size:14*14*5mm
  9).Encoder size:35*35*11mm

4.Interface Description:
  1).GND:GND
  2).A:Encoder Phase A
  3).VCC:5V
  4).B:encoder phase B
  5).M+ motor drive signal
  6).M-:Motor drive signal

5.Note:
   The Hall power supply voltage is 5V. Do not connect it to the motor signal by mistake, otherwise the Hall sensor will be burned out.

6.Package:
  1).1pcs AB Phase Hall Encoder
  2).1pcs magnetic ring
  3).1pcs PH2.0 6P line