• 12V 1A Power Supply Module, AC 85V-265V to 12V 1A Isolated DC Switch Step-Down Module, 12W Adapter Voltage Converter
  • 12V 1A Power Supply Module, AC 85V-265V to 12V 1A Isolated DC Switch Step-Down Module, 12W Adapter Voltage Converter
  • 12V 1A Power Supply Module, AC 85V-265V to 12V 1A Isolated DC Switch Step-Down Module, 12W Adapter Voltage Converter
  • 12V 1A Power Supply Module, AC 85V-265V to 12V 1A Isolated DC Switch Step-Down Module, 12W Adapter Voltage Converter
  • 12V 1A Power Supply Module, AC 85V-265V to 12V 1A Isolated DC Switch Step-Down Module, 12W Adapter Voltage Converter
  • 12V 1A Power Supply Module, AC 85V-265V to 12V 1A Isolated DC Switch Step-Down Module, 12W Adapter Voltage Converter

12V 1A Power Supply Module, AC 85V-265V to 12V 1A Isolated DC Switch Step-Down Module, 12W Adapter Voltage Converter

$5.59
$7.9930%
00d : 00h : 00m : 00s
Item ID: GY19683

Product Details

1.Description:
 It is a 12V 1A power switch module. It converts AC 85V-265V into DC 12V1A.
 
2.Feature:
 1).It uses a wide voltage input AC85-265V.
 2).It uses a brand-new IC solution,selected materials,regulated output,accurate output,and sufficient power and current.
 3).With overload,short circuit and over temperature protection,stable performance and long service life.
 4).The output has low ripple noise, high efficiency,compact size and full functions.
 5).Full load aging test,input and output high and low voltage isolation.
 6).It has an indicator light to show the working status.
 
3.Parameter:
 1).Product Name:12V1A Power Switch Module
 2).Input Voltage:AC 85V-265V
 3).Frequency Range:47Hz-63Hz
 4).Inrush Current:10A
 5).Leakage Current:2mA(Max)
 6).Ripple:50-60mA
 7).Standby Power Consumption:150mV(Max)
 8).Output Voltage:DC 12V
 9).Rated Current:1A
 10).Current Range:0-1000mA
 11).Rated Power:12W
 12).Conversion Efficiency:85%
 13).Output Accuracy:+/-1%
 14).Voltage Adjustment Rate:+/-1%
 15).Load Regulation Rate:+/-1%
 16).Power Switch Overcharge:10%
 17).Leakage Current:5mA(Max)
 18).Work Temperature:-20℃~70℃
 19).Work Humidity:20%~90%RH
 20).Storage Temperature:-40℃~85℃
 21).Storage Humidity:10%~95%RH
 22).Size:65*38*22mm
 
4.Note:
 1).Before using the power supply,make sure that the input and output voltage specifications are consistent with the nominal value of the power supply used.
 2).Before powering on,check whether the input and output leads are correct to avoid damage to the user equipment and burn out the power supply.
 3).The feet of the bottom components of the bare board power board are conductive.Do not touch the bottom of the board during testing.You need to put an insulating rubber pad or clean paper on the bottom of the board to avoid the danger of electric shock and burn the power board.
 
5.Package:
 1pcs 12V1A Power Switch Module
 

Customer Reviews (0)