CNC Stepper Motor Driver DC 10V-30V 4A 1/32 Micro-Step Resolutions for Nema 17 23 Stepper Motor Forward Reverse Controller
00d : 00h : 00m : 00s
Item ID: GY20512
ZK-SMC02 is an operation control module specially designed for single-axis stepper motors. The module has built-in multiple fixed operation modes, and the user can quickly select the appropriate motion trajectory.It can save the setting parameters after power off.
It supports setting distance/speed/delay/cycle times. It can run independently as a module, or it can be used in conjunction with other systems. It can be used in general industrial control occasions.
1>.Integrated step motor controller and driver functions.
2>.Motor forward and reverse control.
3>.3 Control Mode
4>.9 work states
5>.HD LCD display
1>.Product name:ZK-SMC02 CNC Stepper Motor Driver
2>.Input voltage:DC 5V-30V
4>.Control shafts:Single axis
5>.Suitable motor:42/57 step motor(Nema17/23 motor)
7>.Forward pulses number:1-9999
8>.Reverse pulses number:1-9999
10>.Forward delay time:0.0-999.9s
11>.Reverse delay time:0.0-999.9s
13>.Acceleration and deceleration control:Yes
14>.Input reverse polarity protection:Yes
1.1>.The first line displays rotating speed in RPM.
1.2>.The second line displays delay time or loop times which can be set by F-10 menu.
1.3>.Press CW button to clockwise/forward rotating.
1.4>.Press CCW button to counterclockwise/reverse rotating.
1.5>.Press RUN/STOP button to start or stop rotating.
1.6>.Rotate the potentiometer to change the forward or reverse rotation speed. Note:the operation mode is different in different modes.
1.7>.Keep press potentiometer more than 3second enter into parameter set mode.
2.1>.Rotate the potentiometer to change parameter F-01~F-13 after enter parameter set mode.
2.2>.The selected parameter keeps blinking.
2.3>.Press potentiometer to selected parameter value.
2.4>.Modify Value Method 1: Directly rotate the potentiometer to change value.
2.5>.Modify Value Method 2: Press the potentiometer again and the selected bit keep blinking. Then rotate the potentiometer to change value for this bit form 0 to 9. Modify other bits in the same method which can improve setup efficiency and save your time.
2.6>.Press RUN/STOP button return to parameter(Note:parameter and parameter value are not the same).
2.7>.Set others parameters and parameters value if needs.
2.8>.Save and exit parameter set mode after keep press potentiometer more than 3second.
3.1>.It can work independently by default, only need to connect the power supply and stepper motor, and no longer need to connect other accessories.
3.2>.Users can also connect external control buttons to change the operation mode. External control buttons can input from COM/STOP/CCW/CW/OUT terminal on PCB.
3.3>.Users can also connect other types of stepper motor driver and just use ZK-SMC02 alone as a stepper motor controller.Auto/Manual/Setup
4.1>.Automatic Control Mode: Step motor works with ZK-SMC02’s parameters set.
4.2>.Manual Control Mode: This mode needs connect buttons to COM/STOP/CCW/CW terminal on ZK-SMC02.
4.3>.Setup Control Mode: This mode needs connect to others stepper motor driver and just use ZK-SMC02 alone as a stepper motor controller.
1>.It is suitable for 2 phase stepper motors whether it is 4-wire or 5-wire or 6-wire or 8-wire.
2>.It has built-in drivers and controllers, but can also connect other drivers.
1>.Industrial Automation Control
4>.Electronic processing and testing
5>.Automatic assembly line
1pc ZK-SMC02 CNC Stepper Motor Driver