DC 5V WIFI Electronic Clock
Home > Relay Module > Function Relay Module > Trigger Delay Module > DC 5V 12V 24V Trigger Cycle Timer Delay Controller Module 15A 400W MOS Control Switch 16-Work Mode

DC 5V 12V 24V Trigger Cycle Timer Delay Controller Module 15A 400W MOS Control Switch 16-Work Mode

GY18673
5 9
$5.99 $5.09
Contact us for wholesale price
Time Remaining:
- OR - - OR - Add to Wish List
1.Description:
    ZK-TD4 is a MOS Switch Controller Trigger Delay Module with Timer and Cycle functions.It can work in 16kind work mode with or without trigger signal.It also can be delay a random time in the set range.
 
2.Features:
    1>.16kind work mode
    2>.High Level or PNP signal trigger
    3>.Power-ON trigger
    4>.Button switch trigger
    5>.400W 15A MOS Driver 
    6>.Support parameter memory function
    7>.Support UART communication function
    8>.Optocoupler isolated output
    9>.Support forced stop function
    10>.Support power saving mode
 
3.Parameters:
    1>.Product Name:ZK-TD4 Trigger Cycle Timer Delay Controller
    2>.Product Number:ZK-TD4
    3>.Working Voltage:DC 5.0V~30V
    4>.Trigger Type:Button/PNP/High Level Signal
    5>.Trigger Signal:DC 3.0V~24V
    6>.Output Type:Voltage Output(Same to input voltage)
    7>.Output Power:400W(Max)
    8>.Output Current:15A
    9>.Quiescent Current:20mA
    10>.Display: 3Bit Red LED Display Screen
    11>.Working Temperature range:-40℃~85℃
    12>.Working Humidity Range:5%-95%RH
    13>.Module Size:60*34*12mm
 
4.Timing range:
    1>.Continuously adjustable from 0.1 seconds to 999 minutes.
    2>.Enter the settings interface when short press button ‘STOP’ in the parameter modification interface(Flashing) to select timing range.
    3>.Pay attention to the position where the decimal point moves when the button is pressed.
    4>.Display ‘XXX.’ The decimal point is the last bit, the timing range is 1 second ~ 999 seconds.
    5>.Display ‘XX.X’ The decimal point is the penultimate, timing range is 0.1 second to 99.9 seconds.
    6>.Display ‘X.X.X.’ The decimal point is fully lit, timing range is 1 minute to 999 minutes.
    7>.For example, if you want to set the OP to 3.2 seconds, move the decimal point to the penultimate position, Screen will display ‘03.2’
    8>.OP and CL parameters are the same in different work mode.
    9>.It will display OP(CL,LOP) and corresponding delay time by short press button SET in main display interface.
    10>.It just display OP and corresponding delay time in P1 mode by short press button SET in main display interface.
 
5.Parameter Description:
    1>.OP:Delay time for turn On;
    2>.CL:Delay time Turn OFF;
    3>.LOP:Number of cycles.Range is 1-999tims.’----’ means unlimited loop.
    4>.CLL:Minimum value of random delay range. The set range is 0.0~99.9second. This CLL parameter just be used for P15 work mode.
    5>.CLH:Maximum value of random delay range.The set range is 0.0~99.9second. This CLH parameter just be used for P15 work mode.
    6>.SP:Set PWM duty cycle. The set range is 20%,25%,30%,35% to 100%.
 
6.Work Mode:
    1>.Power-ON Trigger Mode:
        1.1>.ZK-TD4 will start delay after power on. This mode no need input other trigger signal. The power supply is the trigger signal. 
        1.2>.P00: Power ON and output keep OFF and start delay time CL. Then turn ON output after delay time CL. E.g. Power ON->OFF->Delay CL->ON.
        1.3>.P01: Power ON and output turn ON and start delay time OP. Then turn OFF output after delay time OP. E.g. Power ON->ON->Delay OP->OFF.
        1.4>.P02: Power ON and output turn ON and start delay time OP. Then turn OFF output after delay time OP. Keep OFF for delay time CL. Then turn ON output after delay time OL. And then loops the above action.The number of cycles (LOP) can be set. Output will keep OFF after cycle. E.g. Power ON->ON->Delay OP->OFF->Delay CL->cycles->OFF.
        1.5>.P03: Power ON and output turn OFF and start delay time CL. Then turn ON output after delay time CL. Keep ON for delay time OP. Then turn OFF output after delay time OP. And then loops the above action.The number of cycles (LOP) can be set. Output will keep ON after cycle. E.g. Power ON->OFF->Delay CL->ON->Delay OP->cycles->ON.
    2>.PNP/High Level Signal Trigger Mode:
        2.1>.ZK-TD4 will start delay after input trigger. This mode need input trigger signal after provide work power supply.
        2.2>.P04: Input trigger signal and output turn ON and start delay time OP. Then turn OFF output after delay time OP. Trigger again is invalid during delay.E.g. Trigger->ON->Delay OP->OFF.
        2.3>.P05: Input trigger signal and output turn ON and start delay time OP. Then turn OFF output after delay time OP. Restart delay OP if trigger again during delay.E.g. Trigger->ON->Delay OP->OFF.
        2.4>.P06: Input trigger signal and output turn ON and start delay time OP. Then turn OFF output after delay time OP. Stop delay and output turn OFF if trigger again during delay.E.g. Trigger->ON->Delay OP->OFF.
        2.5>.P07: Input trigger signal and output keep OFF and start delay time CL. Then turn ON output after delay time CL. E.g. Trigger->OFF->Delay CL->ON.
        2.6>.P08: Input trigger signal and output turn OFF and start delay time CL. Then turn ON output after delay time CL. Keep ON for delay time OP. Then turn OFF output after delay time OP. Trigger again is invalid during delay. E.g. Trigger->OFF->Delay CL->ON->Delay OP->OFF.
        2.7>.P09: Input trigger signal and output turn OFF and start delay time CL. Then turn ON output after delay time CL. Keep ON for delay time OP. Then turn OFF output after delay time OP. Restart delay OP if trigger again during delay. E.g. Trigger->OFF->Delay CL->ON->Delay OP->OFF.
        2.8>.P10: Input trigger signal and output turn OFF and start delay time CL. Then turn ON output after delay time CL. Keep ON for delay time OP. Then turn OFF output after delay time OP. And then loops the above action.The number of cycles (LOP) can be set. Output will keep ON after cycle.Stop delay and output turn ON if trigger again during cycles. E.g. Trigger->OFF->Delay CL->ON->Delay OP->cycles->ON.
        2.9>.P11: Input trigger signal and output turn ON and start delay time OP. Then turn OFF output after delay time OP. Keep OFF for delay time CL. Then turn ON output after delay time CL. And then loops the above action.The number of cycles (LOP) can be set. Output will keep OFF after cycle.Stop delay and output turn OFF if trigger again during cycles. E.g. Trigger->ON->Delay OP->OFF->Delay CL->cycles->OFF.
        2.10>.P12: Input trigger signal and output turn ON and start delay time OP. Then turn OFF output after delay time OP. Keep OFF for delay time CL. Then turn ON output after delay time CL. And then loops the above action.The number of cycles (LOP) can be set. Output will keep OFF after cycle.Trigger again is invalid during cycles. E.g. Trigger->ON->Delay OP->OFF->Delay CL->cycles->OFF.
        2.11>.P13: Keep input trigger signal and output turn ON.Then start delay time OP if remove input trigger.Then turn OFF output after delay time OP.Stop delay and output turn ON if trigger again during delay.
        2.12>.P14: Keep input trigger signal and output turn OFF.Then start delay time CL if remove input trigger.Then turn ON output after delay time CL.Stop delay and output turn OFF if trigger again during delay.
    3>.Random Delay Mode:
        3.1>.P15: Input trigger signal and output keep OFF and start delay time. The delay time between CLL and CLH. Then turn ON output after delay time CLL~CLH.This mode also can set PWM duty cycle from 20%,25%,30%,35% to 100%. (The delay time is a random value between CLL and CLH. Their setting range is 0.0~99.9second and CLH is more than CLL.) E.g. Trigger->OFF->Delay->ON.
 
7.Set steps:
    1>.Confirm the working mode before start to set mode and parameters.
    2>.Keep press SET Button about 2second enter to select work mode.
    3>.Press UP and Down button to switch work mode P00~P015.
    4>.Press SET button to set parameter value for selected work mode such as P03 work mode.
    5>.The first set parameter OP will flashing about 2second and display parameter value.
    6>.Press STOP button to move the decimal point and set delay time range.
    7>.Press UP and Down button to set OP parameter value.
    8>.Press SET button to set the second parameter value CL. Then set time range and parameter value as the same method.
    9>.Press SET button to set the third parameter value LOP. Then set parameter as the same method. Note:’----’ means unlimited loop.
    10>.For P15 work mode the set method is the same for CLL, CLH and SP. Note: The delay time is 0.0~99.9second at this mode.
    11>.Keep press SET Button about 2second to save parameter and exit set mode to start normal work.
 
8.Additional Features:
    1>.Auto sleep function: keep press button 'STOP' about 2second in the normal running interface to turn on or off auto sleep function.
        1.1>C-L:Turn ON auto sleep function.Screen will automatically turns off if there is no operation within 3 minutes.It can be wake up by any buttons.
        1.2>.O-d:Turn OFF auto sleep function.
    2>.Enabled/Disabled output by press button STOP:
        2.1>.ON:Enabled output during delay time OP.
        2.2>.OFF:Disabled output.Module can not output any signal at this mode.
 
9.Use Steps:
    1>.Connect right work voltage from input terminal.
    2>.Set work mode and parameter value.
    3>.Remove work power supply.
    4>.Connect Load and trigger signal if need.
    5>.Re connect the power supply.
    6>.Start normal work with or without in trigger signal by selected work mode.
 
10.Note:
    1>.It can output voltage.The output voltage is same to input voltage.
    2>.It will display ‘000’ if stop work.It shows the decimal point when working.
    3>.The VIN and OUT+ are connected in the internal circuit.
    4>.The GND and OUT- are not connected in the internal circuit. Users cannot connect GND and OUT- together.Otherwise, module will keep the output.
    5>.Please read use manual and description before use.
 
11.Application:
    1>.Delay switching
    2>.Counter
    3>.Access control system
    4>.Car circuit modification
    5>.Motor
    6>.The electromagnetic valve
    7>.Light strip
 
12.Package:
   1pcs ZK-TD4 Trigger Cycle Timer Delay Controller
There are currently no product reviews.

First we should say that ICStation doesn't accept any form of pay on delivery.Items used to be shipped after receiving the order info and payment.

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 



We are PayPal Verified 

 

2) West Union


 

We know that some of you do not have the Paypal account. 

But please take it easy. You can use West Union payment method.
Learn more at West Union at www.westernunion.com.
 
For the receiver info, please contact us at orders@icstation.com.
 
3) Bank Transfer / Wire Transfer / T/T
 

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$500. The bank will charge about US$60 for the transfer fee if we do the payment in these ways. 

For other payment method, please contact us at orders@icstation.com for more details.

1. Hongkong / Sinapore Airmail

(1) Due to the high risk of package lost recently, we have to stop using the free shipping way these days. Hope for your kind understanding! And the $3 is for tracking number and delivery insurance ^0^ Enjoy order from us. 

Free Shipping for all orders over $20 ^0^ (with free tracking number and delivery insurance fee)

(2) Shipping time 
Shipping time is 7-20 business days to most of countries; please view below table for exactly shipping time to your location. 

7-15 working days to: Most of Asia countries
10-16 working days to: USA , Canada , Australia , UK , Most of Europe countries
13-20 working days to: Germany , Russia
18-25 working days to: France , Italy , Spain , South Africa
20-45 working days to: Brazil , Most of South America countries

2. EMS/DHL/UPS Express

(1)Shipping Fee: Free for the order which meet the following requirements
Total price of the order >= 200USD or Total weight of the order >= 2.2KG

When the order meets to one of the above requirement, it will be shipped for FREE via EMS/DHL/UPS Express to below country. 
Asia: Japan , South Korea , Mongolia . Malaysia , Singapore , Thailand , Vietnam , Cambodia , Indonesia , Philippines 
Oceania: Australia , New Zealand , Papua New Guinea 
Europe& America: Belgium, Britain, Denmark, Finland, Greece, Ireland, Italy, Luxembourg, Malta, Norway, Portugal, Switzerland, Germany, Sweden, France, Spain, USA, Austria, Canada
Note: Shipping Fee to other countries, please contact orders@ICStation.com

(2) Shipping Time
Shipping time is 3-5 working day (about 1 week) to most of countries. 

Because the package would be returned to the sender if it had not been signed by the receiver in 2-3 day (DHL) or 1 week (EMS,) or 2 weeks (Registered Email), please pay attention to the arriving time of the package. 

Note:

1) APO and PO Box Addresses

We strongly recommend that you provide a physical address for order delivery. 
Because that DHL and FedEx are unable to deliver items to APO or PO BOX addresses. 
 
2) Contact Phone Number
Receivers' contact phone number is required by express shipping agency for the package delivery. Please provide us with your latest phone number.


3. Note
1) Delivery Time of mixed orders with items in different Shipping Status should be calculated using the longest estimate times listed. 
2) Chinese Holiday Reminder: During annual Chinese holidays, services from certain suppliers and carriers may be affected, and delivery for orders placed around the following times may be delayed by 3 - 7 days: Chinese New Year; Chinese National Day,etc. 
3) Once your order is shipped, you will receive an email notification from icstation.com
4) Track the order which with tracking number via below links:

Registered Airmail: www.17track.net/en

Customers who bought this product also purchased

USB Voltage Current Meter DC 4V-30V 5.1A USB Charger Multi-Function Detector Voltmeter Ammeter
$8.11
$11.59
31
Signal Generator Square Wave Generator 1-Channel 1Hz-150KHz Dual Mode LCD PWM Pulse Frequency Duty Cycle Adjustable Module
$3.74
$4.99
25
DC-DC 12V 15V 24V 36V 50V to 5V Step Down Power Supply Module Battery Car Buck Converter Charger Module 10V-80V to 5V
$4.19
$5.99
31
DC 12V Timer Relay Control Switch DIY Kit 100s Delay Electronic Soldering Practice Learning Kits
$3.21
$4.59
30
433MHz 4CH Wireless Receiver Module + 4-Key Remote Controller 4.5-5.5V 10mA 15-50m Self-locking/Interlock/Momentary Mode
$7.04
$9.39
25
Digital Square Wave Pulse Signal Generator Adjustable PWM Frequency PWM Module Stepping Motor Driver Board 6Hz-100KHz
$4.76
$6.35
25
ESP32-CAM ESP32 5V WIFI Bluetooth Development Board with OV2640 Camera Module
$6.74
$8.99
26

Your Recent History

DC 5V 12V 24V Trigger Cycle Timer Delay Controller Module 15A 400W MOS Control Switch 16-Work Mode
$5.09
$5.99