DC Fast Charging Step Up Module Power Supply 9V 1A Booster Converter Stabilizer
$1.72$2.4530%
00d : 00h : 00m : 00s
Item ID: 13496
Product Details
1.Description:
It is a DC Fast Charging power supply module.It can be used as ordinary buck power supply module, charger and LED constant current driver.Simple and efficient, practical.
2.Features:
1>.Support fast charge;
2>.Large current;
3>.Small size;
4>.High efficiency;
5>.Support disabling output
3.Parameters:
1>.Product Name:DC Fast Charging Step Up Power Supply Module
2>.Working Voltage:DC 3.0V-5.0V
3>.Output Voltage:DC 9.0V
4>.Output Current:1.3A
5>.Conversion efficiency:About 95%
6>.Output ripple: About 80mV
7>.Working Temperature range:-40℃~85℃
8>.Working Humidity range:0%-95%RH
9>.Size:22.5*14*4.2mm
4.Using Steps:
1>.Connect right input voltage at input terminal.
2>.Check output voltage by voltmeter and ammeter.
3>.Connect load.
5.Note:
1>.Its max output current is 1.3A and can not keep output 1.3A.
2>.Please connect a capacitor in series with the input port if user are not using the battery as an input power source.
3>.The positive and negative poles of the input power supply cannot be reversed Otherwise the module will be damaged.
4>.’EN’ is enable control port.Default enabled.User need remove resistor R3 if user need control enable by other such as button.High level TTL signal(2.7V-5V) to turn ON enabled output and low level TTL signal(0-0.5V) to disabled output.
5>.Due to the large current, it is recommended to use a thicker wire.Wire cross-section greater than 1.5 square millimeters.
6>.Please read use manual and description before use.
6.Application:
1>.Ordinary power supply;
2>.Battery charger;
3>.Mobile power;
4>.Power conversion;
5>.Car power supply and battery;
6>.Charging for Mobile phone, MP3, MP4;
7>.Electric car;
8>.Battery car modification

