Please note: There is a slight change of the cables color now.
Original Blue changed to Pink.
Original Yellow changed to Gray.
The new verision is as followings (functions are still the same):
1. Feature
▲FTDI based USB to TTL Serial Cable are designed using the the standard FT232RL chipset. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB.
▲RX and TX LEDs indicator. TTL levels is 3.3V. Cables are FCC, CE, RoHS compliant.
▲The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD's FT232RQ USB to Serial
▲UART interface IC device which handles all the USB signalling and protocols.
▲Each TTL-232R cable contains a small internal electronic circuit board, utilising the FT232R, which is encapsulated into the USB connector end of the cable. The other end of the cable comes with a selection of different connectors supporting various applications .
▲Cables are available with either a 6-way SIL,0.1" connector, a 3.5mmAudio Jack, an 8 way, keyed 2mm pitch connector (intended for use with VMUSIC2 or VDRIVE2) or bare, tinned wire ended connections.
▲The USB side of the cable is USB powered and USB 2.0 full speed compatible. Each cable is 1.0m long and supports a data transfer rate up to 3 Mbaud
2. Note
Black: GND Ground
Pink: CTS Clear to Send Control/Handshake Signal
Red: VCC +5V
Green: TXD Transmit Asynchronous Data
White: RXD Receive Asynchronous Data
Gray: RTS Resquest to Send Control/Handshake Signal
3. Download Driver
www.ftdichip.com/Drivers/VCP.htm
|