The current transformer is an instrument that converts the primary side large current into the secondary side small current according to the principle of electromagnetic induction.
User can set two current thresholds. When the current is in different range, the module makes corresponding actions and controls the load.
1>.Support multiple working modes;
2>.Support setting the current upper limit;
3>.Support setting the current lower limit;
4>.Support setting output startup value;
5>.Support setting output stop value;
6>.Support NC and NO output;
8>.Low power consumption;
9>.Support over current control;
10>.Digital tube display;
12>.Support power-off memory function;
13>.Work output LED indicator.
1>.Product Name:AC 220V 5A Current Detection Module
2>.Working Voltage:DC 12V
3>.Measured Load Voltage:AC 220V
4>.Measured Load Current:0~5A
5>.Measured Current Accuracy:0.01A
6>.Controlled Load Voltage:AC 250V or DC 30V
7>.Controlled Load Current:10A
9>.Working Temperature range:-40℃~85℃
10>.Working Humidity range:0%-95%RH
1>.Display will display current measured current as ‘00.00’ when power on or normal display status.Unit is ampere.
2>.Screen will display mode such as ‘P-21’ at set mode.
2.1>.’P’ will flashing at set mode.
2.2>.The second bit is ‘-’ which is a separator and user can be ignored and no meaning.
2.3>.The third bit like ‘2’ is mode select.It can be 1~5.User can adjust mode by button ‘K2’.
2.4>.The fourth bit like ‘1’ is function select.It can be 1~2.User can adjust function by button ‘K3’.
3>.K1:Set Mode and set Current Lower/Upper Limit Value.
3.1>.User need keep press for more than 1second when press K1 for the first time when enter into set mode.It is used to prevent false triggering;
3.2>.At the first press K1.It is menu to set mode and select by button K2 and K3;
3.3>.At the second press K1.Screen will flashing and display like ‘00.05’.It is menu to set the current lower limit value L1.It means threshold L1 is 0.05A.Press button K2 to increase threshold L1 and K3 to decrease threshold L1.
3.4>.At the third press K1.Screen will flashing and display like ‘00.10’.It is menu to set the current upper limit value L2.It means threshold L2 is 0.10A.Press button K2 to increase threshold L2 and K3 to decrease threshold L2.
3.5>.At the fourth press K1.It will return to normal display current measured current.Indicates that it is in standby mode.
4>.K2:Set mode and increase threshold value.
5>.K3:Set mode and error calibration.
5.1>.Set mode and increase threshold value at Set Mode.
5.2>.Press button K3 in standby mode.It is used to zero adjustment and error calibration.
7>.Set parameters will save in standby mode if power off.
1>.L1:The current lower limit.
2>.L2:The current upper limit.
4>.Relay default OFF.
5>.P-11:Relay ON when the Measured Current is higher than L1;Relay OFF when the Measured Current is lower than L1 again.
6>.P-12:Relay ON when the Measured Current is higher than L1;Relay will keep ON no matter what the Measured Current is after relay turn on.Relay OFF if re-start power supply.
7>.P-21:Relay ON when the Measured Current is higher than L2;Relay OFF when the Measured Current is lower than L1.
8>.P-22:Relay ON when the Measured Current is higher than L2;Relay will keep ON no matter what the Measured Current is after relay turn on.Relay OFF if re-start power supply.
9>.P-31:Relay ON when the Measured Current is lower than L1;Relay OFF when the Measured Current is higher than L2.
10>.P-32:Relay ON when the Measured Current is lower than L1;Relay will keep ON no matter what the Measured Current is after relay turn on.Relay OFF if re-start power supply.
11>.P-41:Relay ON when the Measured Current is between L1 and L2;Otherwise relay OFF.
12>.P-42:Relay ON when the Measured Current is between L1 and L2;Relay will keep ON no matter what the Measured Current is after relay turn on.Relay OFF if re-start power supply.
13>.P-51:Relay ON when the Measured Current is lower than L1 or higher than L2;Otherwise relay OFF.
14>.P-52:Relay ON when the Measured Current is lower than L1 or higher than L2;Relay will keep ON no matter what the Measured Current is after relay turn on.Relay OFF if re-start power supply.
1>.Connect Current Transformer Sensor at ‘IN+’ and ‘IN-’.
2>.Connect power supply DC 12V at ‘DC+’ and ‘DC-’(Please don’t connect load before set work mode).
3>.Make sure what work mode require.
4>.Keep press button K1 for more than 1second enter into set work mode as listing in ‘Function’.Press K2 and K3 to select mode.
5>.Press button K1 at the second time to set the current lower limit value L1.Press K2 and K3 to change value.
6>.Press button K1 at the third time to set the current upper limit value L2.Press K2 and K3 to change value.
7>.Press button K1 at the fourth time to return to normal display current measured current.
8>.Press button K3 to error calibration.
9>.Test the set parameters based on the output indicator and the sound from the relay.
10>.Cut off the power supply and then connect load at output.Note:The load needs to be powered separately.Module can not output voltage.
11>.Turn ON power for module and use module.
1>.Its work voltage is DC 12 and not AC 220V. AC 220V is voltage for the Measured Current.
2>.It's a relay output, so it can not output voltage. It just works like a switch.
3>.User need to provide power supply for load.
4>.Wire cannot be reversed.Otherwise the module will be damaged.
4>.Intelligent circuit control
1pc AC 220V 5A Current Detection Module;
1pc Current Transformer Sensor;
1. Hongkong / Sinapore Airmail
(1) Due to the high risk of package lost recently, we have to stop using the free shipping way these days. Hope for your kind understanding! And the $3 is for tracking number and delivery insurance ^0^ Enjoy order from us.
Free Shipping for all orders over $20 ^0^ (with free tracking number and delivery insurance fee)
(2) Shipping time
Shipping time is 7-20 business days to most of countries; please view below table for exactly shipping time to your location.
7-15 working days to: Most of Asia countries
10-16 working days to: USA , Canada , Australia , UK , Most of Europe countries
13-20 working days to: Germany , Russia
18-25 working days to: France , Italy , Spain , South Africa
20-45 working days to: Brazil , Most of South America countries
2. EMS/DHL/UPS Express
(1)Shipping Fee: Free for the order which meet the following requirements
Total price of the order >= 200USD or Total weight of the order >= 2.2KG
When the order meets to one of the above requirement, it will be shipped for FREE via EMS/DHL/UPS Express to below country.
Asia: Japan , South Korea , Mongolia . Malaysia , Singapore , Thailand , Vietnam , Cambodia , Indonesia , Philippines
Oceania: Australia , New Zealand , Papua New Guinea
Europe& America: Belgium, Britain, Denmark, Finland, Greece, Ireland, Italy, Luxembourg, Malta, Norway, Portugal, Switzerland, Germany, Sweden, France, Spain, USA, Austria, Canada
Note: Shipping Fee to other countries, please contact orders@ICStation.com
(2) Shipping Time
Shipping time is 3-5 working day (about 1 week) to most of countries.
Because the package would be returned to the sender if it had not been signed by the receiver in 2-3 day (DHL) or 1 week (EMS,) or 2 weeks (Registered Email), please pay attention to the arriving time of the package.
1) APO and PO Box Addresses
We strongly recommend that you provide a physical address for order delivery.
Because that DHL and FedEx are unable to deliver items to APO or PO BOX addresses.
2) Contact Phone Number
Receivers' contact phone number is required by express shipping agency for the package delivery. Please provide us with your latest phone number.
1) Delivery Time of mixed orders with items in different Shipping Status should be calculated using the longest estimate times listed.
2) Chinese Holiday Reminder: During annual Chinese holidays, services from certain suppliers and carriers may be affected, and delivery for orders placed around the following times may be delayed by 3 - 7 days: Chinese New Year; Chinese National Day,etc.
3) Once your order is shipped, you will receive an email notification from icstation.com
4) Track the order which with tracking number via below links: