2 Channel PWM Pulse Adjustable Frequency Square Wave Digital Display Signal Generator Module Stepper Motor Controller
1.Operating Voltage:5-30V;support micro USB 5.0V power supply
4.Signal Load Capacity:8-30mA
4 Channel Optocoupler Isolation Electronic Switch Module 4Bit Opto Isolator PLC Transistor
2.Main chip:FR1205 (NMOS)
3.Input Control Voltage: DC 3V-24V
4.Maximum output control voltage is 55V, maximum circuit is 5A
5.Input control power and controlled power are completedly opto...
Digital Square Wave Pulse Signal Generator Adjustable PWM Frequency PWM Module Stepping Motor Driver Board 6Hz-100KHz
1>. Model: YYPWM-1
2>. Frequency Range: 6Hz-100KHz adjustable
3>. Duty Cycle Range: 1-99% adjustable
4>. Power Supply Voltage: DC 3.3-20V
5>. PWM width = input voltage
6>. Output PWM Dr...
5A Dual Motor Drive Module Reverse PWM Speed Regulation Double H Bridge L298N Module DC 3.0V-14V
DC Motor Speed Controller which is also Pulse Width Modulator. Abbreviation PWM.DC motor governor is a device for adjusting the speed of a DC motor.
It has been widely used in DC motor s...
NE555 Pulse Module Duty Cycle Frequency Adjustable Module Square Wave Rectangular Wave Signal Generator
1. Used as a square wave signal generator produces a square wave signal for the experimental development use.
2. Used to generate the square wave signal to drive a stepper motor drive.
3. Produce adjustable pulse...
Mosfet MOS Transistor Trigger Switch Driver Board PWM Control Module 3-20V
1>. Model: YYNMOS-1 (input and output are completely isolated)
2>. Input Signal: 3-20V PWM signal
3>. Output Capacity: DC 3.7-27V, and the current is within 10A
4>. PWM Frequency: 0-20KHz
TB6560 TB6600 3A DC 10V-35V Stepper Motor Driver Module
It is a stepper motor driver.The motor drive board is a circuit that is matched with the motor to make the motor run normally.It is a device required for a specific motor to run.
High-Power Motor Drive Module BTS7960 43A Driver Chip Current Limit Control Semiconductor Refrigeration Drive
It is a motor drive module.This drive adopts the H-bridge drive module composed of high-power drive chip BTS7960,which has the function of overheating and overcurrent protection.
Stepper Motor Drive Controller DC 12-24V Speed Regulation Forward and Reverse Control PWM Signal Generator
It is a stepper motor drive controller.This module is a pulse generation module,which is supplied as a signal to the stepper driver.If you want to control a stepper motor,you must also be equipped with a driver....
Sine Wave Inverter Driver Board EGS002 EG8010+IR2110 Drive Module
It is a pure sine wave inverte.
EG8010 is a digital and fully functional pure sine wave inverter generator chip with dead zone control.
It is used in DC-DC-AC two-stage power conversion architectu...
PWM Pulse Frequency Signal Generator Speed Regulator DC 9V 12V 24V 48V 500W 12A PWM Motor Driver LED Display Module
ZK-BMG is a High-power PWM DC motor governor.
It can adjusts the motor speed by adjusting the duty cycle of the output signal.
It can also adjust the output frequency to match the frequency of the output signa...
TB6600 Motor Driver Board 42/57 Stepper Motor Driver Module DC 9V-40V 0.5A-4A 1/2/4/8/16/32 Subdivision
TB6600 42/57 stepper motor driver.
It is a professional two-phase hybrid stepping motor driver,which can be adapted to various domestic and foreign brands.
The current is 4A and below, and the ou...
Dual Modbus Relay Module 2Bit Modbus-RTU Switch Signal Input Output RS485 TTL Controller
LC 2 channel Modbus relay module equipped with mature and stable 8-bit MCU and RS485 level communication chip,adopt standard MODBUS RTU format RS485 communication protocol. It can realize 2bit input signal detec...
4 Channel Modbus Relay Module 4Bit Modbus-RTU Switch Signal Input Output RS485 TTL Controller
LC 4 channel Modbus relay module equipped with mature and stable 8-bit MCU and RS485 level communication chip,adopt standard MODBUS RTU format RS485 communication protocol. It can realize 4bit input signal detec...
16 Channel PLC Amplifier Module Isolated Transistor Controller NPN Signal Converter 16bit PLC Protector Optocoupler
It is a 16Channel PLC Amplifier Module.It adopts optocoupler isolation control, NPN signal output, safe and reliable.
1>.Optocoupler isolation control
5V 12V 24V 150W ZK-MG High-Power PWM DC Motor Speed Controller Signal Generator Driver Module Speed Regulator 1KHz-99KHz
ZK-MG is a High-power PWM DC motor governor.
It can adjust the motor speed by adjusting the duty cycle of the output signal. It can also adjust the output frequency to match the frequency of the output signal to the...
DC 11V 1.8A DRV8837 2-Channel H-Bridge DC Motor Driver Module
The DRV8837 module is capable of delivering 1.8A of output current. It operates from a motor supply voltage between 0 and 11V and a device supply voltage in the range of 1.8V to 7V. The DRV8837 module has two PWM...
DC Motor Driver Module Forward Reverse Controller 12V 10A Limit Control
Motor forward and reverse controller is used to control motor work status to make sure motor can be precisely controlled.Applicable to occasions where the motor control requirements are increased.
DC Motor Driver Module 10A 12V QF-M05 Forward Reverse Controller Self-locking
Motor forward and reverse controller is used to control motor work status to make sure motor can be precisely controlled. Applicable to occasions where the motor control requirements are increased.
Industrial USB to RS485 Converter CH340 Communication Module TVS Transient Protection
ZK-U485 is a Industrial grade USB to RS485 communication module.
Two-way communication half duplex serial port.
1>.Support TVS transient suppression protec...