It is a PWM 4-Wire fan temperature controller. It has three PWM outputs, each of which can manually adjust the output ratio.
1>.Three PWM outputs
2>.Three-way synchronous speed controlled by temperature probe
3>.Four classic three channels support fan stall alarm control temperature zone combination
4>.Supports anti-sequence control
5>.Three on-board indicators indicate current fan status
1>.Product Name:PWM 4-Wire Fan Temperature Controller
2>.Work Voltage:DC 8V~18V
4>.PWM Output Range:10%~100%
5>.Temperature Probe Parameters:50K B=3950
6>.Stall Alarm Speed Threshold:300rpm(conventional 2 pole fan)
1>.Please note that this product is a four-wire PWM fan controller. It can only control four-wire fans that comply with Intel's four-wire standardized protocol (all chassis and CPU four-wire fans are in compliance. Most violent fans can also be controlled, including anti-sequential),but can not control two or three-line fans, can not completely turn off the fans.
2>.Input Voltage is DC8V~18V. This is the voltage supported by the board, used to control the 12V fan,please pay attention to the working range of the fan.
3>.The fan current is not bigger than 3A per channel. If you need to control a larger current fan, please connect the fan power cord separately.
1>.Manual speed adjustment: speed adjustment through three adjustable resistors on the board.It is recommended to adjust the speed in a low temperature state where temperature control does not work.
2>.Temperature control temperature zone setting: The temperature zone is set by the combination of the switches T1 and T2 (No.1~2) of the DIP switch. The specific temperature zone is described in the table on the back of the board. After the setting is modified, it must be powered off and restart to take effect.
3>.Anti-sequence support:When the DIP switch PF(3) is set to "ON", the output PWM changes in the reverse direction,which is used to control the anti-sequence fan. After changing the setting, it needs to be powered off and restarted to take effect.
4>.Stall alarm setting: FAN1 always turns on the alarm,FAN2 and FAN3 control whether to turn on the alarm buzzer through the 4 and 5 bits (B2 and B3) of the DIP switch.For example, when both B2 and B3 are set to "ON". If any one of the three fans stopsthe buzzer will sound an alarm.
5>.Indicator light on the board:When the fan of the corresponding channel is always on,flashing means that there is no speed signal of the corresponding channel,indicating that the fan of the channel is stopped or not connected (the fan wire sequence is wrong or the speed signal port is damaged).
1>.The fan does not turn: the wire sequence is wrong,the fan is damaged or the voltage does not match.
2>.The fan is not controlled: The fan is not a standard four-wire PWM fan or the fan has a 3-4 wire sequence error.
3>.Reverse change of fan speed: For anti-sequence fans, you need to set the DIP switch PF to "ON" and enable the anti-sequence control mode to work after re-energizing.
7.Four-wire Fan Characteristics:
1>.The four wires of the four-wire fan are composed of the power supply negative pole,the power supply positive pole,the speed measurement signal line and the PWM control line.
First of all,you should find the fan's power line.Generally, if the fan has red and black wires, the red is the positive power supply and the black is negative Level,if there is no red fan,it is generally yellow wire positive and black wire negative. After the power is turned on,the fan runs at full speed.
After connecting the other two wires (not connected elsewhere),the fan speed will be significantly reduced. Disconnect the two wires and connect the control wire to the negative pole,the fan will run at a lower speed(some fans will stop) Note that this last step can be used to find the control line,because the speed line is not connected to the negative pole of the power supply.
2>.The control line and speed measurement line of the fan cannot be connected to the positive pole of the power source.
1>.1pcs PWM 4-Wire Fan Temperature Controller
3>.1pcs Temperature Sensor
First we should say that ICStation doesn't accept any form of pay on delivery.Items used to be shipped after receiving the order info and payment.
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) West Union
We know that some of you do not have the Paypal account.
But please take it easy. You can use West Union payment method.
For the receiver info, please contact us at email@example.com.
3) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$500. The bank will charge about US$60 for the transfer fee if we do the payment in these ways.
For other payment method, please contact us at firstname.lastname@example.org for more details.
1. Hongkong / Sinapore Airmail
(1) Due to the high risk of package lost recently, we have to stop using the free shipping way these days. Hope for your kind understanding! And the $3 is for tracking number and delivery insurance ^0^ Enjoy order from us.
Free Shipping for all orders over $20 ^0^ (with free tracking number and delivery insurance fee)
(2) Shipping time
Shipping time is 7-20 business days to most of countries; please view below table for exactly shipping time to your location.
7-15 working days to: Most of Asia countries
10-16 working days to: USA , Canada , Australia , UK , Most of Europe countries
13-20 working days to: Germany , Russia
18-25 working days to: France , Italy , Spain , South Africa
20-45 working days to: Brazil , Most of South America countries
2. EMS/DHL/UPS Express
(1)Shipping Fee: Free for the order which meet the following requirements
Total price of the order >= 200USD or Total weight of the order >= 2.2KG
When the order meets to one of the above requirement, it will be shipped for FREE via EMS/DHL/UPS Express to below country.
Asia: Japan , South Korea , Mongolia . Malaysia , Singapore , Thailand , Vietnam , Cambodia , Indonesia , Philippines
Oceania: Australia , New Zealand , Papua New Guinea
Europe& America: Belgium, Britain, Denmark, Finland, Greece, Ireland, Italy, Luxembourg, Malta, Norway, Portugal, Switzerland, Germany, Sweden, France, Spain, USA, Austria, Canada
Note: Shipping Fee to other countries, please contact orders@ICStation.com
(2) Shipping Time
Shipping time is 3-5 working day (about 1 week) to most of countries.
Because the package would be returned to the sender if it had not been signed by the receiver in 2-3 day (DHL) or 1 week (EMS,) or 2 weeks (Registered Email), please pay attention to the arriving time of the package.
1) APO and PO Box Addresses
We strongly recommend that you provide a physical address for order delivery.
Because that DHL and FedEx are unable to deliver items to APO or PO BOX addresses.
2) Contact Phone Number
Receivers' contact phone number is required by express shipping agency for the package delivery. Please provide us with your latest phone number.
1) Delivery Time of mixed orders with items in different Shipping Status should be calculated using the longest estimate times listed.
2) Chinese Holiday Reminder: During annual Chinese holidays, services from certain suppliers and carriers may be affected, and delivery for orders placed around the following times may be delayed by 3 - 7 days: Chinese New Year; Chinese National Day,etc.
3) Once your order is shipped, you will receive an email notification from icstation.com
4) Track the order which with tracking number via below links: