ICStation 20190822
Home > Power Module > Step Down Module > DC Motor Drive Module 120W Auto Governor Timing Delay Controller Board Display 7V-24V Forward Reverse Control

DC Motor Drive Module 120W Auto Governor Timing Delay Controller Board Display 7V-24V Forward Reverse Control

13379
5 9
$10.79 $7.55
Time Remaining:
- OR - Add to Wish List
1.Description:
    Motor forward and reverse controller is used to control motor work status to make sure motor can be precisely controlled. Applicable to occasions where the motor control requirements are increased.
 
2.Features:
    1>.Multiple working modes;
    2>.Optocoupler isolated output;
    3>.Support stepless speed regulation;
    4>.Low power consumption;
    5>.Multiple speed control grades;
    6>.Long work time;
    7>.Automatic control;
    8>.H-bridge circuit principle;
    9>.Support DC motor forward and reverse;
    10>.Support Speed regulation;
    11>.Support timing;
    12>.Support Limit operation;
    13>.Support power-off memory function;
    14>.Work output LED indicator;
    15>.Support Inching Mode;
    16>.Support Self-locking Mode;
 
3.Parameters:
    1>.Product Name:DC Motor Forward and Reverse Controller Module 
    2>.Product Number:YF-8
    3>.Working Voltage:DC 7.0V-24V
    4>.Support Motor Power:DC 7.0V-24V(Less than 120W)
    5>.Time Range:0.01s~999m
    6>.Speed Range:1~99 grades
    7>.Stand-by Current:10mA
    8>.Working Temperature range:-40℃~85℃
    9>.Working Humidity range:0%-95%RH
    10>.Size:84*44*25mm
 
4.Button/Screen Description:
    1>.Display will display ‘----’ when power on .
    2>.Screen will display mode such as ‘P--1’ at set mode.
        2.1>.’P’ will flashing at set mode.
        2.2>.The second bit is ‘-’ which is a separator and user can be ignored and no meaning.
        2.3>.The third bit is ‘-’ which is a separator and user can be ignored and no meaning.
        2.4>.The fourth bit like ‘1’ is mode select.It can be 1~8.User can adjust function by button ‘+’ and ‘-’.
    3>.SET:Set Mode.
        3.1>.User need keep press for more than 1second when press SET for the first time when enter into set mode.It is used to prevent false triggering;
        3.2>.At the first press SET.It is menu to set mode and select by button ‘+’ and ‘-’. And ’P’ will flashing;
        3.3>.At the second press SET.Screen will display like ‘A001’ and ‘A’ will flashing.It is menu to set the first timing time A by button ‘+’ and ‘-’.Button ‘KEY’ is used to adjust decimal point or time unit.
        3.4>.At the third press SET.Screen will display like ‘B001’ and ‘B’ will flashing.It is menu to set the first timing time B by button ‘+’ and ‘-’.Button ‘KEY’ is used to adjust decimal point or time unit.
        3.5>.At the fourth press SET.It will return to normal display mode.Indicates that it is in standby mode.It will display ‘----’.
    4>.’+’:Set mode and Adjust time and Adjust speed grades.
        4.1>.Select mode with ‘SET’ button at the first press ‘SET’.
        4.2>.Adjust time for A/B with ‘SET’ button at the second/third press ‘SET’.
        4.3>.Adjust speed grades.Screen will display like ‘D-99’ and ‘D’ will flashing when press button ‘+’ at normal display status.It is used to set speed grades. Change grades by button ‘+’ and ‘-’.
    5>.’-’:Set mode and Adjust time and Adjust speed grades.
        5.1>.Select mode with ‘SET’ button at the first press ‘SET’.
        5.2>.Adjust time for A/B with ‘SET’ button at the second/third press ‘SET’.
        5.3>.Adjust speed grades.Screen will display like ‘D-99’ and ‘D’ will flashing when press button ‘+’ at normal display status.It is used to set speed grades. Change grades by button ‘+’ and ‘-’.
    6>.KEY:Adjust decimal point and ON/OFF screen.
        6.1>.Adjust decimal point or time unit for A/B with ‘SET’ button at the second/third press ‘SET’.
        6.2>.Turn ON or OFF display screen at normal display status.
    7>.Set parameters will save in standby mode if power off.
 
5.Function:
    1>.A:The first working time.
    2>.B:The second working time.
    3>.P--1:Inching Mode. 
        3.1>.Motor forward rotation when get control signal from ‘Signal 1’.Motor stop when ‘Signal 1’ disappear.
        3.2>.Motor reverse rotation when get control signal from ‘Signal 2’.Motor stop when ‘Signal 2’ disappear.
    4>.P--2:Self-locking Mode.
        4.1>.Motor forward rotation when get control signal from ‘Signal 1’ and keep working regardless of whether the ‘Signal 1’ disappear.
        4.2>.Motor reverse rotation when get control signal from ‘Signal 2’ and keep working regardless of whether the ‘Signal 2’ disappear.
        4.3>.Motor stop when get control signal from ‘Signal 3’.
    5>.P--3:Inching Timing Mode.
        5.1>.Motor keep forward rotation for time A after get control signal from ‘Signal 1’ and then stop.
        5.2>.Motor keep reverse rotation for time B after get control signal from ‘Signal 2’ and then stop.
        5.3>.The motor stops working immediately when get control signal from ‘Signal 3’.
    6>.P--4:Self-locking Timing Mode.
        6.1>.Motor keep forward rotation for time A after get control signal from ‘Signal 1’ and then stop.
        6.2>. Motor forward rotation after get control signal from ‘Signal 1’.Motor will stop if get control signal from ‘Signal 2’.Received ‘Signal 2’ before the end of the timing A is valid.
        6.3>.Motor keep reverse rotation for time B after get control signal from ‘Signal 1’ again and then stop.
        6.4>. Motor reverse rotation after get control signal from ‘Signal 1’ again.Motor will stop if get control signal from ‘Signal 3’.Received ‘Signal 3’ before the end of the timing B is valid.
    7>.P--5:Inching Timing Mode.
        7.1>.Motor keep forward rotation for time A when get control signal from ‘Signal 1’ and then stop.
        7.2>.Motor keep forward rotation when get control signal from ‘Signal 1’.Motor will stop if get control signal from ‘Signal 2’.Received ‘Signal 2’ before the end of the timing A is valid.
        7.3>.Motor keep reverse rotation for time B after ‘Signal 1’ disappear and then stop.
        7.4>.Motor reverse rotation after ‘Signal 1’ disappear.Motor will stop if get control signal from ‘Signal 3’.Received ‘Signal 3’ before the end of the timing B is valid.
    8>.P--6:Motor forward rotation for time A when get control signal from ‘Signal 1’ .And then stop for time C.Then reverse rotation for time B.Cycle again if get ‘Signal 1’ again.Infinite loop if keep ‘Signal 1’.
    9>.P--7:Motor keep forward rotation when get control signal from ‘Signal 1’.Then stop for timing A after get control signal from ‘Signal 2’.Then keep reverse rotation.Stop for timing B after get control signal from ‘Signal 3’.Keep infinite loop.Module will keep this mode if keep ‘Signal 1’ after power on. 
    10>.P--8:Motor forward rotation for time A when get control signal from ‘Signal 1’.Then stop timing C.Then reverse rotation timing B.Then stop timing C.Then forward rotation timing A.Keep infinite loop.Module will keep this mode if keep ‘Signal 1’ after power on.
 
6.Timing range:
    Continuously adjustable from 0.01 seconds to 9999 minutes.
    Enter the settings interface at the second/third press ‘SET’.
    Pay attention to the position where the decimal point moves when the button is pressed.
    Display ‘X.XX’ The decimal point next to the third bit, timing range is 0.01 second to 9.99 seconds.
    Display ‘XX.X The decimal point next to the second bit, timing range is 0.1 second to 99.9 seconds.
    Display ‘XXX’ No decimal point, timing range is 1 second ~ 999 seconds.
    Display ‘XXX.’The decimal point next to the first bit, timing range is 1 minute to 999 minutes.
 
7.Using Steps:
    1>.Connect power supply DC 7.0~24V at input terminal(Please don’t connect load before set work mode).
    2>.Make sure what work mode require.
    3>.Keep press button ‘SET’ for more than 1second enter into set work mode as listing in ‘Function’.Press ‘+’ and ‘-’ to select mode.
    4>.Press button ‘SET’ at the second time to set timing A.Press ‘+’, ‘-’and ‘KEY’ to set time.
    5>.Press button ‘SET’ at the third time to set timing B.Press ‘+’, ‘-’and ‘KEY’ to set time.
    6>.Press button ‘SET’ at the fourth time to return to normal display.
    7>.Press button ‘+’ or ‘-’ set to speed grades.Screen will flashing and automatic save after 2second.
    8>.Test the set parameters based on the output indicator.
    9>.Cut off the power supply and then connect load at output.
    10>.Turn ON power for module and use module.
 
8.Note:
    1>.Set the correct parameters;
    2>.Select right motor;
    3>.Wire can not be reversed.Otherwise the module will be damaged.
 
9.Application:
    1>.Toy
    2>.Intelligent robot control
    3>.Smart car
    4>.Curtain
    5>.Mechanical control
There are currently no product reviews.

First we should say that ICStation doesn't accept any form of pay on delivery.Items used to be shipped after receiving the order info and payment.

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 



We are PayPal Verified 

 

2) West Union


 

We know that some of you do not have the Paypal account. 

But please take it easy. You can use West Union payment method.
Learn more at West Union at www.westernunion.com.
 
For the receiver info, please contact us at orders@icstation.com.
 
3) Bank Transfer / Wire Transfer / T/T
 

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$500. The bank will charge about US$60 for the transfer fee if we do the payment in these ways. 

For other payment method, please contact us at orders@icstation.com for more details.

1. Hongkong / Sinapore Airmail

(1) Due to the high risk of package lost recently, we have to stop using the free shipping way these days. Hope for your kind understanding! And the $3 is for tracking number and delivery insurance ^0^ Enjoy order from us. 

Free Shipping for all orders over $20 ^0^ (with free tracking number and delivery insurance fee)

(2) Shipping time 
Shipping time is 7-20 business days to most of countries; please view below table for exactly shipping time to your location. 

7-15 working days to: Most of Asia countries
10-16 working days to: USA , Canada , Australia , UK , Most of Europe countries
13-20 working days to: Germany , Russia
18-25 working days to: France , Italy , Spain , South Africa
20-45 working days to: Brazil , Most of South America countries

2. EMS/DHL/UPS Express

(1)Shipping Fee: Free for the order which meet the following requirements
Total price of the order >= 200USD or Total weight of the order >= 2.2KG

When the order meets to one of the above requirement, it will be shipped for FREE via EMS/DHL/UPS Express to below country. 
Asia: Japan , South Korea , Mongolia . Malaysia , Singapore , Thailand , Vietnam , Cambodia , Indonesia , Philippines 
Oceania: Australia , New Zealand , Papua New Guinea 
Europe& America: Belgium, Britain, Denmark, Finland, Greece, Ireland, Italy, Luxembourg, Malta, Norway, Portugal, Switzerland, Germany, Sweden, France, Spain, USA, Austria, Canada
Note: Shipping Fee to other countries, please contact orders@ICStation.com

(2) Shipping Time
Shipping time is 3-5 working day (about 1 week) to most of countries. 

Because the package would be returned to the sender if it had not been signed by the receiver in 2-3 day (DHL) or 1 week (EMS,) or 2 weeks (Registered Email), please pay attention to the arriving time of the package. 

Note:

1) APO and PO Box Addresses

We strongly recommend that you provide a physical address for order delivery. 
Because that DHL and FedEx are unable to deliver items to APO or PO BOX addresses. 
 
2) Contact Phone Number
Receivers' contact phone number is required by express shipping agency for the package delivery. Please provide us with your latest phone number.


3. Note
1) Delivery Time of mixed orders with items in different Shipping Status should be calculated using the longest estimate times listed. 
2) Chinese Holiday Reminder: During annual Chinese holidays, services from certain suppliers and carriers may be affected, and delivery for orders placed around the following times may be delayed by 3 - 7 days: Chinese New Year; Chinese National Day,etc. 
3) Once your order is shipped, you will receive an email notification from icstation.com
4) Track the order which with tracking number via below links:

Registered Airmail: www.17track.net/en

Customers who bought this product also purchased

4S 10A 14.8V 16.8V 18650 Li-ion Lithium Battery Charger BMS Protection PCB Board
$3.49
$4.99
31
DC 10V-50V PWM Motor Speed Controller Regulator LED Dimmer DC 12V 24V 36V 48V 15A
$3.69
$4.99
26
DC 0-99.9V Red LED Display Panel 3 Digits Digital Voltmeter with Alarm Indicator
$2.95
$3.99

Sold Out

27
DC to DC Adjustable Step Up Boost Converter Power Supply Module Voltage Regulator DC 3-35V to DC 3.5-35V with Voltmeter Display
$5.38
$7.69
31
USB 2.0 to TTL UART 5 PIN Serial Converter Module CP2102 STC PRGMR
$2.33
$3.15
26
24Pin XH-M229 Desktop PC Power Output ATX Transfer Board Supply Power Output Connection Module
$4.89
$6.99
31
10A Lithium Battery Charger Controller Protection Board Module 6-60V LCD Display
$5.24
$7.49
30
Blue LY6W 36V Electricity Quantity Display External Installation for Lead Acid Battery
$4.43
$5.99
27
ICStation MT3608 DC to DC Step Up Converter Module Boost Converter Power Supply Module ICSA004A
$0.69
$0.99
31
DC-DC USB Adjustable Step Up Step Down Power Supply Module Red Display Buck Boost Voltage Converter 5V to 1V-24V with Case
$3.07
$4.39
30
ESP8266 WiFi 12V 2 Channel Relay Module IOT Smart Home Remote Control Switch Android Phone APP Control Transmission Distance 100M
$6.50
$9.29
30
433MHz Wireless Remote Control Switch Module Transceiver Receiver Transmitter DC 2.5V-5.0V
$2.72
$3.89
31

Your Recent History

DC Motor Drive Module 120W Auto Governor Timing Delay Controller Board Display 7V-24V Forward Reverse Control
$7.55
$10.79
30