Home > Wireless Module > Other > 433MHz Wireless Remote Control Switch Module Transceiver Receiver Transmitter DC 2.5V-5.0V

433MHz Wireless Remote Control Switch Module Transceiver Receiver Transmitter DC 2.5V-5.0V

13351
5 9
$3.99 $2.79
Contact us for wholesale price
Time Remaining:
- OR - - OR - Add to Wish List
1.Description:
    The module uses the latest 433MHz wireless transmission technology. Stable and reliable performance, long communication distance and strong anti-interference ability. It is suitable for the development and application of toys, model airplanes and other products.
 
2.Features:
    1>.Support 3 working mode
    2>.With an antenna;
    3>.Independent address code;
    4>.Support custom add remote control;
    5>.Button selection mode;
    6>.Support multiple remote controls to control one receiver;
    7>.Support one remote control to control multiple receivers.
 
3.Parameters:
    1>.Working Voltage:DC 2.5V-5.0V
    2>.Working current:3mA
    3>.Sensitivity:-108DBM
    4>.Rate:10KB/S(MAX)
    5>.Work Mode:Inching,self-locking,interlocking
    6>.Default Work Mode:Inching mode
    7>.Output:4-Channel CMOS TTL output
    8>.Support Remote controller:20(MAX)
    9>.Support coding chip:EV1527,PT2262
    10>.Communication distance:50 meters (Just 25 meters if work with motor due to interference from motor.)
    11>.Working Temperature range:-20℃~85℃
    12>.Working Humidity range:0%-95%RH
    13>.Receiver Size:2.7*1.2*0.7mm
    14>.Remote Control Size: 65*40*15mm
 
4.Work Mode:
    1>.Inching Mode:Default is inching work mode. Corresponding output channel on receiver will output high level when press button on remote control. It will keep output high level if keep press. Output low level when release button. 4-channel output ports are independent of each other.
    2>.Self-locking Mode:Corresponding output channel on receiver will output high level when press once button on remote control.Output low level when press same button once again on remote control.That is, press the button once to change the state once.4-channel output ports are independent of each other.
    3>.Interlocking Mode:Corresponding output channel on receiver will output high level when press once button on remote control.But other 3-channels will output low level.E.g:D0 on receiver will output high level when press button ‘A’ and D1~D3 will output low level.4 output ports are not independent.
 
5.Clear Code:
    1>.Connect right power supply for receiver;
    2>.Press the set button 8 times continuously on receiver;
    3>.LED will turn OFF;
    4>.LED flashes 8 times;
    5>.Clear code operation succeeded;
    Note: If you need update the working mode of the remote control, please clear the code first.
 
6.Pair code:
    1>.Connect right power supply for receiver;
    2>.Press the set button for different times on receiver according to the desired working mode.Then the LED indicator will turn ON. It means enter learning pair code mode:
        2.1>.Inching Mode:Press set button on receiver for 1 times;
        2.2>.Self-locking Mode:Press set button on receiver for 2 times;
        2.3>.Interlocking Mode:Press set button on receiver for 3 times;
    3>.Press any button on remote control.It means pairing success when LED indicator on receiver turn OFF after flashes 3 times if receiver receive signal from remote control.
    4>.Multiple remote controls to control one receiver:Press set button on receiver and it LED will keep ON at learning pair code mode.And then press any button on remote control.
 
    Note: 1) Automatically exit learning pair code mode after 10 seconds when enter pair code mode, if the receiver does not receive signal from remote control.
            2) Every time when changing the working mode, the code must be cleared first.
            3) The receiver can be controlled by up to 20 remote controls.
 
8.Application:
    1>.Wireless remote control car;
    2>.Ship model;
    3>.Model airplane;
    4>.Wireless temperature and humidity detection;
    5>.Intelligent data collection;
    6>.Motor drive.
 
9.Package:
    1pc 433MHz Wireless Remote Control Receiver (with Antenna);
    1pc 433MHz Remote Control.

 

There are currently no product reviews.

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 



We are PayPal Verified 

 

2)  Bank Transfer / Wire Transfer / T/T

 

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.

Customers who bought this product also purchased

DIY Hearing Aid Electronic Kit Amplifier Circuit Experimentation Soldering Assembly and Hands-On Learning
$2.51
$3.59
30
JSN-SR04T Integrated Ultrasonic Distance Measuring Sensor Module Waterproof Transducer Sensor
$9.09
$12.99
30
ICStation TDA2030A DIY Kit 2.0 15W+15W Dual Channel Audio Amplifier Board Power Amplifier DIY Module
$4.89
$6.99
31
5PCS DC 5V 3W LED Lamp Board White Light 600mA 400LM 6500K for USB Touch Dimmer
$6.29
$8.99
30
4WD Robot Smart Car Chassis with Speed Encoder 4pcs TT Motor Acrylic Board
$20.29
$28.99
30
Smart Car Intelligent Robot Tracking Car D2-5 Soldering DIY Kits DC Motor Electric Accessories for Electronics Competition
$5.59
$7.99
31
DIY Kit C51 Intelligent Vehicle Obstacle Avoidance Tracking Car, Smart Robot Car Kit School Competition Electronic Projects for Students and DIYers Learn to Solder
$17.49
$24.99
30
JF-0530B DC12V 300mA 5N/10mm Pull-Push-Type Solenoid Electromagnet
$3.49
$4.99
31
5pcs D20mm Ultrasonic Mist Maker Atomizing Transducer Atomizer Ceramic Humidifier Accessories
$3.49
$4.99
31
113KHz 16mm Ultrasonic Mist Maker Fogger Atomizer Transducer Ceramic Discs for Humidifier Replacement Parts
$2.51
$3.59
30
Micro USB Dual Humidifier 110KHz 2W 20mm Ultrasonic Mist Maker Atomizer Controllable ON/OFF
$5.59
$7.99
31
18650 Lithium Battery Holder V8 Mobile Power Expansion Board
$6.29
$8.99
30

Your Recent History

433MHz Wireless Remote Control Switch Module Transceiver Receiver Transmitter DC 2.5V-5.0V
$2.79
$3.99
30