It is a multifunctional battery charging/discharging controller.It is a digital display charging control board.It has overvoltage and undervoltage protection boards.It can be used for battery charging module.
3>.Large power supply range
4>.Product with case
5>.A variety of functions
6>.Overvoltage and undervoltage protection
7>.Dual voltage value setting
1>.Product Name:Multifunctional Voltage Control Switch
2>.Output Voltage:DC 12V
4>.Voltage Measurement Range:0V~+99.9V
4.Key Use Instructions:
1>.Long press SET 1.5 seconds to enter the voltage setting page.There are two sets of preset voltages U1, U2.Short press SET 0.5 seconds to set voltage U1.After setting U1,short press SET 0.5 seconds to set voltage U2.After setting up,short press SET or wait five seconds to save the data.
2>.Short press SET 0.5 seconds,The second line of the display flashes to enter the working mode setting page.Press +/- to set the desired working mode.After setting,short press SET or wait five seconds to save the data.
2.1>.Voltage Detection P1:When the system is in P1 mode,the relay keep OFF, and the measurement terminal can measure DC voltage.The voltage measurement range is 0V~99.9V.
2.2>.Charging Mode P2:The system is in P2 mode,when the Measured Voltage Value is lower than the Lower Limit Voltage Value, the relay is ON. When the Measured Voltage Value is higher than the Upper Limit Voltage Value,the relay is OFF,when the set Upper Limit Voltage Value is equal to the Lower Limit Voltage Value,the relay is always ON and is in a state of constant charging.
2.3>.Discharge mode P3:The system is in P3 mode,when the Measured Voltage Value is higher than the Upper Limit Voltage Value, the relay is ON, when the measured voltage is lower than the Lower Limit Voltage Value, the relay is OFF.When the Upper Limit Voltage Value is set equal to the Lower Limit Voltage Value, the relay will always be OFF and in a state of constant discharge.
2.4>.Intra-area Suction P4:The system is in P4 mode,when the Measured Voltage Value is between the upper limit and the lower limit, the relay keep ON, and in other cases the relay is turned OFF.
2.5>.Out of range P5:The system is in P5 mode,when the Measured Vvoltage Value is lower than the Lower Limit Voltage Value, or the Measured Voltage Value is higher than the Upper Limit Voltage Value, the relay turn ON; otherwise, the relay is OFF.
1>.Battery voltage will decrease after use.
The positive and negative electrodes of the battery generate positive and negative charges according to different materials in the battery.As the battery is used more often,the positive and negative charges will gradually decrease.The positive and negative charge concentrations in positive and negative materials gradually decrease.The decrease in concentration causes the current to decrease.The voltage of the battery is the current multiplied by the internal resistance of the battery, so the voltage will become smaller.If the battery has been used for a long time,the voltage is still normal,and the battery is charged.It means that the battery is broken.This is because the battery internal resistance becomes larger.Such batteries cannot be used,and generally only need to be replaced.
2>.Common battery charging voltage parameter table(for reference only)
2.1>.6V battery:The charging voltage range is 6V~7.2V
2.2>.12V battery:The charging voltage range is 12V~14.4V
2.3>.24V battery:The charging voltage range is 24V~28.8V
2.4>.36V battery:The charging voltage range is 36V~46.8V
2.5>.48V battery:The charging voltage range is 48V~57.6V
2.6>.72V battery:The charging voltage range is 72V~86.4V
2.7>.Note:Do not charge more than one tenth of the battery capacity.Charging voltage is not higher than 1.2 times of the battery's nominal voltage.
1>.Intelligent charging and discharging control of storage batteries and lithium batteries. By setting two sets of Upper and Lower Limit Voltages Value, the charging and discharging of the battery can be effectively monitored, and the damage caused by overcharging and undercharging of the battery is avoided.
2>.For DC voltage measurement, the system integrates 5 kinds of working modes, and works in P1 mode, it can be used as a voltmeter, and the measurement voltage range is 0-99.9V.
3>.Suction within or outside the range.
1>.1pcs Red+Blue Battery Charge Discharge Controller;
2>.1pcs XH2.54-2P 15cm Wire.
First we should say that ICStation doesn't accept any form of pay on delivery.Items used to be shipped after receiving the order info and payment.
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) West Union
We know that some of you do not have the Paypal account.
But please take it easy. You can use West Union payment method.
For the receiver info, please contact us at email@example.com.
3) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$500. The bank will charge about US$60 for the transfer fee if we do the payment in these ways.
For other payment method, please contact us at firstname.lastname@example.org for more details.
1. Hongkong / Sinapore Airmail
(1) Due to the high risk of package lost recently, we have to stop using the free shipping way these days. Hope for your kind understanding! And the $3 is for tracking number and delivery insurance ^0^ Enjoy order from us.
Free Shipping for all orders over $20 ^0^ (with free tracking number and delivery insurance fee)
(2) Shipping time
Shipping time is 7-20 business days to most of countries; please view below table for exactly shipping time to your location.
7-15 working days to: Most of Asia countries
10-16 working days to: USA , Canada , Australia , UK , Most of Europe countries
13-20 working days to: Germany , Russia
18-25 working days to: France , Italy , Spain , South Africa
20-45 working days to: Brazil , Most of South America countries
2. EMS/DHL/UPS Express
(1)Shipping Fee: Free for the order which meet the following requirements
Total price of the order >= 200USD or Total weight of the order >= 2.2KG
When the order meets to one of the above requirement, it will be shipped for FREE via EMS/DHL/UPS Express to below country.
Asia: Japan , South Korea , Mongolia . Malaysia , Singapore , Thailand , Vietnam , Cambodia , Indonesia , Philippines
Oceania: Australia , New Zealand , Papua New Guinea
Europe& America: Belgium, Britain, Denmark, Finland, Greece, Ireland, Italy, Luxembourg, Malta, Norway, Portugal, Switzerland, Germany, Sweden, France, Spain, USA, Austria, Canada
Note: Shipping Fee to other countries, please contact orders@ICStation.com
(2) Shipping Time
Shipping time is 3-5 working day (about 1 week) to most of countries.
Because the package would be returned to the sender if it had not been signed by the receiver in 2-3 day (DHL) or 1 week (EMS,) or 2 weeks (Registered Email), please pay attention to the arriving time of the package.
1) APO and PO Box Addresses
We strongly recommend that you provide a physical address for order delivery.
Because that DHL and FedEx are unable to deliver items to APO or PO BOX addresses.
2) Contact Phone Number
Receivers' contact phone number is required by express shipping agency for the package delivery. Please provide us with your latest phone number.
1) Delivery Time of mixed orders with items in different Shipping Status should be calculated using the longest estimate times listed.
2) Chinese Holiday Reminder: During annual Chinese holidays, services from certain suppliers and carriers may be affected, and delivery for orders placed around the following times may be delayed by 3 - 7 days: Chinese New Year; Chinese National Day,etc.
3) Once your order is shipped, you will receive an email notification from icstation.com
4) Track the order which with tracking number via below links: