It is a 1660 Hole Breadboard.
There are many small jacks on the breadboard,which are specially designed and manufactured for the solderless test of electronic circuits.
Various electronic components can be inserted or unplugged as needed,eliminating the need for welding,saving circuit assembly time,and components can be reused,which is very suitable for the assembly,debugging and training of electronic circuits.
1).Easy to install and simple to operate.
2).Small in size and does not take up space.
3).It uses ABS plastic panel and tinned phosphor bronze contact piece, which can be used with confidence.
4).It can be recycled and is environmentally friendly.
1).Product Name:1660 Hole Breadboard
2).Two Terminal Strip Jacks:1260 jacks
3).Four Distribution Strip Jacks:400 jacks
5).Support Voltage Range:300V
6).Support Current Range:3A-5A
1.) There are several metal jacks connected to the conductive metal strip on the reverse side of the breadboard. They correspond to the small holes on the front.Therefore,when using the breadboard,you need to pay attention.
When inserting the component feet into the small holes,make sure that the component feet are inserted to the end (necessary Tweezers are needed,especially when the integrated block is inserted into the breadboard,it is often easy to cause looseness.
At this time,the two rows of pins of the integrated block can be pressed closer to each other to firmly insert the small hole.
2.) The test point and the ground terminal in the circuit should be specially led out for measurement,otherwise the probe of the instrument is directly connected to the component foot,which may cause the component to be loosened.
1).1pcs 1660 Hole Breadboard
3).4pcs Rubber Pad
ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.
For other payment method, please contact us at email@example.com for more details.