This kit uses NE555 and CD4017 chips to form an analog alarm light circuit. The blue LED and red LED flash alternately according to the pulse, and the flash frequency can be adjusted by adjusting RP1. The working voltage of the circuit is DC9-12V, and the kit does not include a power supply (battery). The kit is simple to produce, has obvious effects, and is highly interesting. It is suitable for practical assembly by electronics enthusiasts and vocational school students.
1>.Work Voltage:DC 12V
1>.The positive and negative electrodes of the LED are soldered incorrectly, and the long leg positive electrode. Be careful not to burn the LED during soldering. One bad or faulty soldering may cause one column to be off.
2>.The triode does not pay attention to the direction, and should be positioned in the same position as the shape on the board.
3>.The resistance value is incorrect. It is necessary to weld according to the resistance value on the board, with two being 100 ohms and three being 10K.
4>."The positive and negative electrodes of diode 1N4148 are wrong, with a black side as the negative electrode, and a horizontal bar on the board as the negative electrode.".
5>.The positive and negative electrodes of the electrolytic capacitor are incorrect, and the long leg is the positive electrode.
6>.The chip notch direction should be consistent with the notch direction on the board, as should the base.
7>.The power supply is connected reversely, causing the chip to burn out. The VCC is connected to the positive electrode, and the GND is connected to the negative electrode.
ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.
For other payment method, please contact us at email@example.com for more details.