Home > Sensor Module > Temperature Module > Digital Temperature Controller Switch Module Micro Digital Thermostat Board LCD Display with NTC Waterproof Sensor Probe

Digital Temperature Controller Switch Module Micro Digital Thermostat Board LCD Display with NTC Waterproof Sensor Probe

13295
5 9
$7.35 $5.15
Contact us for wholesale price
Time Remaining:
- OR - - OR - Add to Wish List

Description:
It is a digital temperature controller module.LCD display, very clear, easy to use, powerful.It can be widely used at Smart home, Industrial control,Automatic irrigation, Indoor ventilation.Protection equipment.

Features:
1>.LCD display;
2>.Power-down memory function;
3>.Emergency stop function;
4>.Real-time display temperature;
5>.Automatically save parameters;
6>.Support UART Set;
7>.High temperature buzzer alarm;
8>.Work status indicator;
9>.Wide range of delay start times    

Parameters:
1>.Product Name:Digital Temperature Controller
2>.Product Number:XY-T01
3>.Working Voltage:DC 6V-30V or 5V Micro USB
4>.Control Load Current:10A(Max)
5>.LCD refresh rate:0.5 second
6>.Temperature Sensor:NTC-10K B3950
7>.Test temperature: -50~110℃
8>.Control precision:0.1℃
9>.Sensor length: 0.5 meter
10>.Sensor probe specifications:4*30mm Stainless steel
11>.Physical dimension:68*42*21mm

Working Mode:
1>.’ H ’: Heating mode.
Relay will turn ON and the heating device starts to work when Current Temperature Value is less than Setting Temperature Value - Return Temperature Value.
Relay will turn OFF and the heating device stops to work when Current Temperature Value is more than Setting Temperature Value.

2>.’ C ’: Cooling mode.
Relay will turn ON and the cooling device starts to work when Current Temperature Value is more than Setting Temperature Value + Return Temperature Value.
Relay will turn OFF and the cooling device stops to work when Current Temperature Value is less than Setting Temperature Value.

3>.’ OPH ’: ON/OFF delayed start.
The system starts timing 'T' when a normal heating or cooling operation is completed.The system will begin the next round of heating or cooling only after 'T'>'OPH'.

4>.’ OFE ’: Temperature correction function(-10.0~10.0℃).
If the module works for a long time, there may be deviations. Corrected by this function.
Actual Temperature Value = Current Temperature Value + Calibration Value.

5>.’ ALA ’: Set high temperature alarm.
Module will turn on the sound and light alarm and relay will OFF at the same time when Current Temperature Value is more than Set Alarm Temperature Value.Any button to stop the sound and light alarm.

Additional Features:
1>. Set or read data by UART.
The parameters such as start temperature, stop temperature, temperature correction, etc. can be set through the UART.
2>.Temperature real-time reporting.
The module transmits the detected temperature to the terminal through the UART at intervals of 1 s to facilitate data acquisition if the temperature reporting function is turned on.
3>.Relay enable (default on).
If the relay enable is turned off, the relay remains off.
That is, the output state will never change, no matter what the measured temperature is.
4>.Reset.
Press button ‘STOP’ and ‘SET’ for more than 3second at the same time to restore the factory settings.

Set Parameter:
Long press:keep press button for more than 3second.
1>.Set Working mode/Setting temperature/Return Temperature Value
1.1>.Short press button 'SET' and enter the quick setting interface;
1.2>.Switch the parameters that need to be set for Working mode/Setting temperature/Return Temperature Value by short press button 'SET'.
1.3>.Modify the parameter value by button 'UP' or 'DOWN' after select parameter.Support short press/long press;
1.4>.Exit the quick setting interface and save the parameters by long press button 'SET' for 3second or continue 6S without any button operation.
NOTE:The Return Temperature Value display in the first line where the Current Temperature Value display position.
The Setting Temperature Value display in the second line after ‘H’ or ‘C’.

2>.Set OPH/OFE/ALA
2.1>.Long press button 'SET' and enter the parameter setting interface.
2.2>.Switch the parameters that need to be set for OPH/OFE/ALA by short press button 'SET'.
2.3>.Modify the parameter value by button 'UP' or 'DOWN' after select parameter.Support short press/long press;
2.4>.Exit the quick setting interface and save the parameters by long press button 'SET' for 3second or continue 6S without any button operation.
2.5>How to turn on the high temperature alarm ‘ALA’ (default off).Select ‘ALA’ interface,short press button ‘STOP’ to ON or OFF ‘ALA’.Set high temperature value by button ‘UP’ or ‘DOWN’ if turn ON ‘ALA’.If the high temperature alarm function is turned OFF, ‘ALA’ displays ‘----’ as a reminder.LCD will display ‘W’ if turn ON ‘ALA’.
2.6>.How to enable delayed start ‘ OPH ’(default off).Select ‘ OPH ’ interface,short press button ‘STOP’ to ON or OFF ‘ OPH ’.Set delay time value by button ‘UP’ or ‘DOWN’ if turn ON ‘ OPH ’.If the delayed star function is turned OFF, ‘ OPH ’ displays ‘----’ as a reminder.LCD will display ‘h’ in last line and last bit if turn ON delayed start.

UART communication and parameter settings:
The system supports UART data upload and parameter setting functions (TTL level);
UART: 9600, 8, 1

NO. Command Function
1 start Start temperature report
2 stop Stop temperature report
3 read Read setting parameters
4 on Relay enable ON
5 off Relay enable OFF
6 S:XXX Setting temperature(-50~-01;00.0~99.9;100~110℃)
7 B:XX.X Set Return Temperature Value (00.0~30.0℃)
8 OFE:XX.X Temperature calibration (-10.0~10.0℃)
9 ALA:XX.X Alarm temperature (-50.0~110.0℃)
10 OPH:XXXX Delayed start time (0~9999minutes)


Application:
1>. Smart home
2>. Industrial control
3>. Automatic irrigation
4>. Indoor ventilation
5>. Self-made thermostatic control box
6>. Equipment cabinet
7>. Air conditioning system
8>. Temperature control protection
9>. Refrigerator
10>. Freezer
11>. Water heater
12>. Hosts
13>. Hatch control

Package Listing:
1>. 1pcs XY-T01 Digital Temperature Controller
2>. 1pcs 0.5meter NTC-10K B3950 sensor
3>. 4pcs White isolation seat

Documentations:


Product Details:







 



 

There are currently no product reviews.

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 



We are PayPal Verified 

 

2)  Bank Transfer / Wire Transfer / T/T

 

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.

Customers who bought this product also purchased

Intelligent Temperature Controller 3-Speed Automatic Control Sensor w/ 5V Fan
$9.09
$12.99
30
3PCS Temperature and Humidity Sensor, SDHT10 Digital Temperature and Humidity Sensor
$5.31
$7.59
31
840pcs 24 Values NPN PNP Transistor Kits TO-92 2N2222 S8050 S8550 S9012 S9013 S9014 S9015 S9018 Component Kit
$13.99
$19.99

Sold Out

30
Mini MP3 Lossless Decoder Board Bluetooth-compatible Receiver Board Amplifier Module for Car Speaker Amplifier
$2.00
$3.99
50
2000PCS GM5528 5mm Photoresistor, 100mW Bright Resistance, 10Kohm~20Kohm Photoelectric Switch Sensor
$6.99
$9.99
30
0.96 Inch Yellow Blue OLED Display Module Support IIC Communication 51 Single Chip Microcomputer 128*64 Resolution
$7.69
$10.99
31
10 Kinds Switch Button 250pcs Touch Switch Patch Button
$6.29
$8.99
30
L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino
$3.21
$4.59

Sold Out

30
150pcs 10 Values Adjustable Potentiometer Kits 100ohm 200ohm 470ohm 1K 3.3K 4.7K 10K 20K 30K 47K 100K 200K 300K 500K 1M Component Kit
$8.11
$11.59
31
XY-P40W Dual Channel Stereo Bluetooth-compatible Power Amplifier Board 5V 12V 24V 20W 30W 40W Infrared Remote Control Receiver Module Audio module with Case
$6.99
$9.99
30
DC 3V-5V 1-Channel Infrared Receiver Board Module Remote Controller Support Self-locking/Inching/Interlocking Mode
$2.79
$3.99
30
55pcs CH-2 250V Anti-Flaming Terminal 2Bit Push Fast Terminal Spring Lever Reuseable Terminal
$6.99
$9.99
30

Your Recent History

Digital Temperature Controller Switch Module Micro Digital Thermostat Board LCD Display with NTC Waterproof Sensor Probe
$5.15
$7.35
31