Home > Power Module > Stabilivolt Module > DC Electronic Load Tester Battery Capacity 35W 5A Adjustable Constant Current Aging Resistor Discharger LCD Voltage Current Power Display
9>.Over voltage protection: Default 25.2V(Adjustable)
10>.Over current protection: Default 5.10A(Adjustable)
11>.Over power protection: Default 35.5W(Adjustable)
12>.Under voltage protection: Default 1.5V(Adjustable)
13>.Over temperature protection: About 80℃(Unadjustable)
14>.Fan speed: 8000RPM+/-10%
15>.Work Temperature: -40℃~85℃
16>.Work Humidity: 0%~95%RH
17>.Size: 79*43*56mm
4.Function:
1>.Display current A, voltage V, power W, capacity Ah and Discharge time
2>.Automatically count discharge capacity and discharge time
3>.Supports setting maximum discharge capacity (OAH) and maximum discharge time (OHP). (Achieve unattended for power aging test)
4>.Intelligent temperature control fan.The fan automatically starts when the power is greater than 10W or the temperature is greater than 40℃
5>.Rotary coded potentiometer for precise current adjustment to 0.01A
6>.The current can be locked to prevent misoperation
7>.Data group function:user can choose whether to accumulate the capacity value and running time of the previous phase
8>.Support UART data communication
5.Protection mechanism:
1>.FZ35 supports reverse protection for input terminal and output terminal.
2>.OVP over voltage protection.
The default protection value is 25.2V. But user can modify the values as required.Screen will display OVP and flashing after start over voltage protection.
3>.OCP over current protection.
The default protection value is 5.10A.But user can modify the values as required.Screen will display OCP and flashing after start over current protection.
4>.OPP over power protection.
The default protection value is 35.5W.But user can modify the values as required.Screen will display OPP and flashing after start over power protection.
5>.OTP over temperature protection.T
he default protection value is 80℃. It can not be modified! Screen will display OTP and flashing after start over temperature protection.
6>.LVP under voltage protection.
The default protection value is 1.5V. But user can modify the values as required.Screen will display LVP and flashing after start under voltage protection.In the battery discharge test, setting the appropriate LVP can effectively prevent the battery from being over-discharged, so as not to damage the battery.
6.Initialization state:
Automatically display the last parameter value.
7.Discharge capacity and discharge time statistics:
1>.Discharge capacity statistics:FZ35 start to statistics when load current is not zero. After the next load current is zero, it is considered that a discharge process is completed and the statistics are over.
2>.Discharge time statistics: FZ35 start to statistics when load current is not zero. After the next load current is zero, it is considered that a discharge process is completed and the statistics are over.
8.Set OAH and OHP:
1>.Set maximum capacity OAH:FZ35 automatically stops working and flashes "OAH" on screen when the load discharge capacity is higher than the set maximum capacity after enable OAH function.The capacity statistics are automatically cleared after the OAH alarm is released.
2>.Set maximum discharge time OHP:FZ35 automatically stops working and flashes "OHP" on screen when the load discharge time is more than the set maximum discharge time after enable OHP function.The discharge time statistics are cleared automatically after the OHP alarm is released.
3>.The OAH and OHP can be perfectly implemented unattended for power aging test.
4>.FZ35 will record discharge capacity and discharge time even if OAH and OHP are not enable.But FZ35 stops working after reaching the set value if OAH and OHP are enable.The running time of the FZ35 is the countdown mode when enable OHP.
9.Data group function DAT:
1>.DAT0:Only flashing and display the capacity value and running time of the previous stage, and not adding to the next stage.
2>.DAT1:Flashing and display the capacity value and running time of the previous stage, and automatically added to the next stage.
10.Run interface description:
1>.Press ‘ON/OFF’ button to turn ON FZ35 after power on.
2>.Set current value by rotary potentiometer.
3>.Press potentiometer to switch display parameter on the second line.The first line display voltage and the second line display current/power/capacity/time.
4>.Screen will display current when rotary potentiometer at any display interface.
5>.Keep press ‘ON/OFF’ for more than 3 seconds to lock parameter at current display interface.Screen will display lock symbol if enable data lock function.At this time, the load current cannot be adjusted in real time by the rotary potentiometer to prevent misoperation.
6>.Keep press ‘ON/OFF’ for more than 3 seconds to clear the corresponding capacity/time data at capacity/time display interface.
11.Setting interface description:
1>.Keep press potentiometer for more than 3 seconds to enter set parameter interface.
2>.Set load current by rotary potentiometer.Increase the current value clockwise.
3>.Switch set parameter by press potentiometer.
4>.Press ‘ON/OFF’ button to enabled or disabled OAH(OHP) function at OAH(OHP) display interface.Screen will display ‘----’ if disabled OAH(OHP) function.
5>.Rotary potentiometer to set value at OUP/OCP/OPP/LUP/OAH/DAT parameter.
6>.Keep ‘ON/OFF’ button to set capacity range at OAH interface.Each time press button, the decimal point moves by one, and then rotates the potentiometer to modify the value.The capacity range is 9.999Ah/99.99Ah /999.9Ah/9999Ah.
7>.At OHP set interface,the second line will display ‘--:--’.User need press ‘ON/OFF’ button to set hours and minutes parameters and then rotary potentiometer to set value.
8>.Keep press potentiometer for more than 3 seconds to save parameters after setting is complete.Then exit the settings interface.
12.Using steps:
1>.Connect to work voltage at ‘V+’ and ‘V-’.
2>.Set right parameters as set manual.
3>.Remove work voltage and connect load.
4>.Re-power.Test and use.
13.Application:
1>.Load test
2>.Circuit test
3>.Battery test
4>.Factory equipment inspection
14.Note:
1>.It can not output voltage. User need connect load power supply for load.
2>.Please read use manual and description before use.
1.Tested by ICStation's Outstanding Partner:
Learn More Details in the Video: (The language in the video isEnglish)
2. Tested by ICStation's Outstanding Partner Treicer100:
Learn More Details in the Video: (The language in the video isRussian)
3. Tested by ICStation's Outstanding Customer Rolf:
First we should say that ICStation doesn't accept any form of pay on delivery.Items used to be shipped after receiving the order info and payment.
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) West Union
We know that some of you do not have the Paypal account.
But please take it easy. You can use West Union payment method.
For the receiver info, please contact us at orders@icstation-team.com.
3) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$500. The bank will charge about US$60 for the transfer fee if we do the payment in these ways.
For other payment method, please contact us at orders@icstation-team.com for more details.
1. Yanwen / YunExpress / 4PX / China PostAirmail Service
(1) Due to the high risk of package lost recently, we have to stop using the free shipping way these days. Hope for your kind understanding! And the $5 is for tracking number and delivery insurance ^0^ Enjoy order from us.
Free Shipping for all orders over $20 ^0^ (with free tracking number and delivery insurance fee)
(2) Shipping time Shipping time is 7-20 business days to most of countries; please view below table for exactly shipping time to your location.
7-15 working days to: Most of Asia countries 10-16 working days to: USA , Canada , Australia , UK , Most of Europe countries 13-20 working days to: Germany , Russia 18-25 working days to: France , Italy , Spain , South Africa 20-45 working days to: Brazil , Most of South America countries
2. DHL/FedEx Express
(1)Shipping Fee: Free for the order which meet the following requirements Total price of the order >= 200USD or Total weight of the order >= 2.2KG
When the order meets to one of the above requirement, it will be shipped for FREE via EMS/DHL/UPS Express to below country. Asia: Japan , South Korea , Mongolia . Malaysia , Singapore , Thailand , Vietnam , Cambodia , Indonesia , Philippines Oceania: Australia , New Zealand , Papua New Guinea Europe& America: Belgium, Britain, Denmark, Finland, Greece, Ireland, Italy, Luxembourg, Malta, Norway, Portugal, Switzerland, Germany, Sweden, France, Spain, USA, Austria, Canada Note: Shipping Fee to other countries, please contact orders@icstation-team.com
(2) Shipping Time & Delivery Time
Shipping time: 1-3 days
Delivery time: 5-10 working days (about 1-2 weeks) to most of countries.
Because the package would be returned to the sender if it had not been signed by the receiver , please pay attention to the arriving time of the package.
Note:
1) APO and PO Box Addresses
We strongly recommend that you provide a physical address for order delivery.
Because that DHL and FedEx are unable to deliver items to APO or PO BOX addresses.
2) Contact Phone Number
Receivers' contact phone number is required by express shipping agency for the package delivery. Please provide us with your latest phone number.
3. Note 1) Delivery Time of mixed orders with items in different Shipping Status should be calculated using the longest estimate times listed. 2) Chinese Holiday Reminder: During annual Chinese holidays, services from certain suppliers and carriers may be affected, and delivery for orders placed around the following times may be delayed by 3 - 7 days: Chinese New Year; Chinese National Day,etc. 3) Once your order is shipped, you will receive an email notification from icstation.com 4) Track the order which with tracking number via below links:
.jpg)
.jpg){kind=spacer}
