Your Shopping Cart Is Empty!
If you already have an account, Sign in.
If you already have an account, Sign in.
Categories
 |
By MARK CLARK Rating:  [5 of 5 Stars!]I built this for a friend (retired police officer) in Blue put it on a AAA battery hox with an 8" plastic tube for a window display. I would like to see this Kit with White LED's |
 |
By wanita zhang Rating: [5 of 5 Stars!]With regard to the above question, here is our answer: 1. It can not change to the momentary switch, otherwise it can play normally only when the button is pressed. 2. The photosensor can be replaced with a button. |
|
By Rating: [5 of 5 Stars!]I have a question that I hope you can answer, is it possible to replace the button with a momentary switch or just an on off switch so that it only plays when the switch is on. Also I was thinking that I could replace the light sensor on the light activated one with an on off switch but I dont know if that would fry the circuit. |
 |
By MARK CLARK Rating: [5 of 5 Stars!]Nice and very easy Kit. I put the LED's on the revised (only white) side and did not use the DC barrel jack I installed a JST 2.0 PH 2Pin Connector Plug and used a Li-ion 250mAh battery with its own TP4056, which works great. I can also then use a power bank with an adaptor.
|
 |
By MARK CLARK Rating: [5 of 5 Stars!]Nice kit easy to assemble. I received an upgraded controler, it is surface-mounted on a board sth same (40 pins SM) size easy to solder with no through holes so it looks better. All the components are on one side and the LEDs are on the other
|
 |
By Rating: [5 of 5 Stars!]Great kit really fun to build and fast shipping
|
 |
By MARK CLARK Rating: [5 of 5 Stars!]I have used this to charge li-ion and Gell cell batteries and also to power my soldering, it works great.
|
 |
By Karim Ismail Rating: [5 of 5 Stars!]Works like a charm. Easy soldering and lots of fun.
Functions with 9V Battery or DC current.can turn on/off
via any Remote Control in the house. Will purchase a few
more.
|
 |
By Anthony Veneruso Rating: [5 of 5 Stars!]Excellent little radio, but requires patience, good soldering iron and DYI skill. Sound quality is good with speaker and best with earphones. Lithium battery is not supplied but a good source is Adafruit 3.7V battery with red and black wires. To assemble case, I used tape to hold nuts while I screwed in the nuts. |
 |
By Lars Thunberg Rating: [5 of 5 Stars!]Works very good! Please see my Github for using this board as a web server relay switch:
https://github.com/LarsThunberg/antenna-lna-ESP8266WebRelaySwitch
|
