XY-W50L Wi-Fi Electronic Clock Bluetooth Amplifier
XY-W50L is a high-power 50W*2 Stereo Bluetooth Digital Power Amplifier Board with WIFI Electronic Clock Alarm. So user can get time and alarm when enjoying music to make a comfortable life.
Its WiFi timing function supports automatic networking APP control.It has a built-in global time zone that can be used anywhere.It can set 6 alarm clocks and 8 levels of adjustable brightness.It allows users to access and prompt the arrival of alarm clock anytime and anywhere, which is very suitable for nursing occasions.
It supports 2.0 channels audio signal output.Built-in amplifier module therefore it can connect to loudspeaker directly. It supports Bluetooth music receive and AUX/USB audio input. It is ideal for DIY wireless Bluetooth speakers and transponders.
1>.Wireless WiFi auto calibrate time and time zone.
2>.App remote firmware auto upgrade.
3>.0.8inch LED display screen.
4>.Display time and date.
5>.Programmable 6 alarm clocks.
6>.Programmable 8 brightness levels.
7>.Built-in global time zone.Automatically check the time every hour.
8>.Built-in clock battery to make sure the real time clock.
9>.Optional automatic power saving function.The screen will OFF without any operation in 10 second if enable power saving function.
10>.Auto save setting parameters.
5.Set WIFI Clock:
1>.Adjust screen brightness:
1.1>.Press ‘ UP ’ or ‘ DWON ’ button to adjust screen brightness.
2>.Set time and date:
2.1>.Keep press ’ SET ’ button 1 second enter into set time and date mode.
2.2>.Set 12/24H: Then press ‘ UP ’ or ‘ DWON ’ button to select 12H or 24H.
2.3>.Set Hour: Press short ’ SET ’ button for the 1st time and then press ‘ UP ’ or ‘ DWON ’ button to change value.
2.4>.Set Minute: Press short ’ SET ’ button for the 2nd time and then press ‘ UP ’ or ‘ DWON ’ button to change value.
2.5>.Set Month: Press short ’ SET ’ button for the 3rd time and then press ‘ UP ’ or ‘ DWON ’ button to change value.
2.6>.Set Day: Press short ’ SET ’ button for the 4th time and then press ‘ UP ’ or ‘ DWON ’ button to change value.
2.7>.Set Year: Press short ’ SET ’ button for the 5th time and then press ‘ UP ’ or ‘ DWON ’ button to change value.
2.8>.Set 12/24H: Press short ’ SET ’ button for the 6th time and then press ‘ UP ’ or ‘ DWON ’ button to 12H or 24H hourly optional system.
2.9>.Save and exit: Keep press ’ SET ’button 1 second to save parameters and return to normal display status.
3.1>.Keep press ’ SET ’ button 3 second enter into set alarm mode.
3.2>.Short press ’ SET ’ to switch set parameters.
3.3>.Press ‘ UP ’ or ‘ DWON ’ button to set parameters value.
3.4>.Symbol ‘A1.ON’ means turn ON the 1st alarm. The same for A2.ON to A6.ON.
3.5>.Symbol ‘A1.OF’ means turn OF the 1st alarm. The same for A2.OF to A6.OF.
3.6>.There are 6 alarm clocks in total. Users can choose how many alarm clocks to enable according to needs.
3.7>.Save and exit: Keep press ’ SET ’button 1 second to save parameters and return to normal display status.
4>.Set Power Saving Mode:
4.1>.Keep press ’ UP ’ button 1 second enter to turn ON or OFF power saving mode.
4.2>.Symbol ‘ LP:ON ’ means turn ON power saving mode.The screen will OFF without any operation in 10 second if enable power saving function.Press any button to turn ON screen.
4.3>.Symbol ‘ LP:OF ’ means turn OFF power saving mode.The screen will keep ON at this mode.
5>.Set display mode:
5.1>.Keep press ’ DOWN ’ button 1 second at normal display status to set display mode.
5.2>.Only display time.
5.3>.Display time and day in turns.
6.APP WIFI Clock Control:
1>.Keep press ’ SET ’ button 5 second enter into Touch WIFI pairing mode at running status. Blue LED indicator flashes 4 times every 1 second interval at Touch pairing mode.
2>.Keep press ’ SET ’ button 5 second again enter into AP WIFI pairing mode after Touch mode. Blue LED indicator flashes continuously and rapidly at AP pairing mode.
3>.Enter Touch WIFI pairing mode by default after power ON.
4>.Open APP Sinilink and register an account.
5>.Select and click Touch(select AP mode if pairing fails)
6>.Input your WIFI password and then next. Note: It just can support 2.4GHz WIFI signal but not support 5GHz WIFI.
7>.Set device information and then connect.
8>.Select AP mode by press ’ SET ’ button 5 second if pairing fails at Touch mode. User needs select WIFI network ‘Sinilink Product’ and input password 12345678. Then open APP and select AP mode.
7.APP Bluetooth Control:
1>.Open APP Sinilink and register an account if need control by APP.
2>.Select add device and then click the Bluetooth logo.
3>.Then click Search Bluetooth.
4>.Select devices ‘Sinilink-APP’ to connect module.
5>.User can adjust volume, select next or previous, play/pause, select EQ.
6>.Module will speak prompt voice if disconnected.
1>.Choose the right speaker and connect as shown in wiring diagram.
2>.Connect to right power supply from input terminal.LED indicator will flashing and it means that module enters pairing mode.And then speak prompt voice and it means that module is waiting for pairing.
3>.Turn ON Bluetooth on phone.
4>.Select Bluetooth device ‘XinYi’ in your Bluetooth device listing.
5>.LED indicator will keep ON and it means that module is successfully connected and is waiting for playing.
6>.Module will play music after select music on phone. LED indicator will keep slowly blinking.
7>.Pairing APP Sinilink to set clock or control Bluetooth music as required.
1>.Car Music Clock
2>.Remote alarm clock synchronization prompt
4>.Amplifier equipment for training/activity site and so on
5>.Car Bluetooth device
6>.Music Festival Party
7>.Family entertainment and leisure
8>.Games and Cinema
1>.Put XY-W50L,Router and phone together as much as possible when paring for WIFI clock.Phone must connect WIFI this router when paring.
2>.Recommended power supply voltage DC 12V~24V with more than 2A current. Module will be damaged if input voltage is more than 24V.
3>.Please don’t use too long wires to avoid signal interference.
4>.There can be enough power output only when the audio input is sufficient and the power supply voltage/current input is sufficient.
5>.The higher the power supply voltage, the greater the output power.
6>.The smaller the impedance of the speaker, the greater the output power. It is recommended to use 4ohm speaker.
7>.Please read use manual and description before use.
11.Frequently Asked Questions:
1.How to choose a power supply adapter?
Q: The power supply of the module is very critical. The user must pay enough attention to the power supply. Otherwise it may not work properly. The ripple of the selected power supply must be small. A power supply with a large ripple will cause the background noise of the power amplifier board to become larger and there will be current sound.
It needs 5.5*2.1mm or 5.5*2.5mm power adapter and it is recommended to use 12V/24V power supply with current more than 2A.
The higher the voltage and the higher the current then the better the output power. It is better to connect 4ohm speaker if the power voltage less then 21V. It is recommended to use 24V voltage if use 8ohm speaker. It will be damaged if input voltage is more than 24V.
If the voltage is too low, the sound will be distorted after the sound is amplified.
If the current is too small, the speaker cannot be driven to work or the speaker will pull the voltage low and resulting in abnormal operation or poor sound quality.
Adjust the volume to the maximum may be distorted and affecting the sound quality if input low power adapter such as 9V/12V or 1A/2A adapter.
2.How to choose a speaker?
Q:Commonly used speakers are generally 4ohm~8ohm.The speaker no need distinguish between positive and negative polarity.
The speakers need to be connected to full-range speakers or high-frequency speakers and the power is between 10W~100W. The rated power is 50W*2.
It can also work properly if the speaker has low power such as 20W~50W. But it needs connect to low power adapter such as less than 15V to prevent damage to the speaker.
User don't have to worry about the problem of the speaker burning out if connect to 50W~100W speaker.Module can connect 12V~24V.The higher the voltage selected, the greater the sound or power that can be output. Speaker power cannot exceed 100W, otherwise it will affect the sound quality.
3.How to choose Bluetooth or AUX audio input mode?
Q: AUX/USB mode has priority over Bluetooth mode.User need disconnect AUX or USB if use Bluetooth as input audio signal. The priority of connecting first is high for AUX and USB.
4.Why is the volume working normally when volume small and there is turbidity after increase volume?
Q: Sound distortion.Please change the adapter power supply with higher voltage and current. Or decrease the volume.
5.Why is the volume working normally when volume small and there is pause after increase volume?
Q: The input power is insufficient.Please change the adapter power supply with higher voltage and current.
Power supply itself intermittent power-off protection.Please change a match power adapter.
The power of the power supply is too large so please reduce the power of the input power.
The power amplifier board is seriously heated resulting in trigger overheat protection.So please increase the radiator.
6.What factors are related to the sound quality?
Q:The sound quality is not only related to the power amplifier module but also related to the power supply, sound source and the entire sound system.
Basically every factor of the sound system will affect the sound quality. The main factors include the audio transmission line, audio power supply, tone circuit, power amplifier circuit, speaker and surrounding environment.
The sound quality is the best when the sound source, power supply, power amplifier module and speaker match.
1pcs XY-W50L WIFI Electronic Clock Bluetooth Amplifier
First we should say that ICStation doesn't accept any form of pay on delivery.Items used to be shipped after receiving the order info and payment.
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) West Union
We know that some of you do not have the Paypal account.
But please take it easy. You can use West Union payment method.
For the receiver info, please contact us at email@example.com.
3) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$500. The bank will charge about US$60 for the transfer fee if we do the payment in these ways.
For other payment method, please contact us at firstname.lastname@example.org for more details.
1. Yanwen / YunExpress / 4PX / China PostAirmail Service
(1) Due to the high risk of package lost recently, we have to stop using the free shipping way these days. Hope for your kind understanding! And the $5 is for tracking number and delivery insurance ^0^ Enjoy order from us.
Free Shipping for all orders over $20 ^0^ (with free tracking number and delivery insurance fee)
(2) Shipping time Shipping time is 7-20 business days to most of countries; please view below table for exactly shipping time to your location.
7-15 working days to: Most of Asia countries 10-16 working days to: USA , Canada , Australia , UK , Most of Europe countries 13-20 working days to: Germany , Russia 18-25 working days to: France , Italy , Spain , South Africa 20-45 working days to: Brazil , Most of South America countries
2. DHL/FedEx Express
(1)Shipping Fee: Free for the order which meet the following requirements Total price of the order >= 200USD or Total weight of the order >= 2.2KG
When the order meets to one of the above requirement, it will be shipped for FREE via EMS/DHL/UPS Express to below country. Asia: Japan , South Korea , Mongolia . Malaysia , Singapore , Thailand , Vietnam , Cambodia , Indonesia , Philippines Oceania: Australia , New Zealand , Papua New Guinea Europe& America: Belgium, Britain, Denmark, Finland, Greece, Ireland, Italy, Luxembourg, Malta, Norway, Portugal, Switzerland, Germany, Sweden, France, Spain, USA, Austria, Canada Note: Shipping Fee to other countries, please contact orders@ICStation.com
(2) Shipping Time & Delivery Time
Shipping time: 1-3 days
Delivery time: 5-10 working days (about 1-2 weeks) to most of countries.
Because the package would be returned to the sender if it had not been signed by the receiver , please pay attention to the arriving time of the package.
1) APO and PO Box Addresses
We strongly recommend that you provide a physical address for order delivery.
Because that DHL and FedEx are unable to deliver items to APO or PO BOX addresses.
2) Contact Phone Number
Receivers' contact phone number is required by express shipping agency for the package delivery. Please provide us with your latest phone number.
3. Note 1) Delivery Time of mixed orders with items in different Shipping Status should be calculated using the longest estimate times listed. 2) Chinese Holiday Reminder: During annual Chinese holidays, services from certain suppliers and carriers may be affected, and delivery for orders placed around the following times may be delayed by 3 - 7 days: Chinese New Year; Chinese National Day,etc. 3) Once your order is shipped, you will receive an email notification from icstation.com 4) Track the order which with tracking number via below links: