Categories
1.Introduction:
TJ-56-678 is a Electromagnetic Swinging Device Circuit Electronic Soldering DIY Kit as know as swing or wiggler or wobbler. Automatically swing by magnetism from coil and magnet.
It can not only be used as a DIY electronic kit that allows you to better understand the circuit and learn how to soldering, but also as a very suitable experimental workbench tool.
2.Feature:
1>.Automatic control swinging device
2>.RGB LED Automatic Flashing
3>.Simple Operation
3.Parameter:
1>.Work voltage: DC 5V
2>.Power Type: DC-005
3>.Work Temperature:-40℃~85℃
4>.Work Humidity:5%~95%RH
5>.Size(Installed):99*59*164mm
4.Note:
1>.A3144 Hall Sensor must be placed above the metal axis of the coil, not above the copper wire of the coil, otherwise it cannot swing normally.
2>.The magnet cannot remain stationary for a long time (5 seconds) after power ON, otherwise it will cause damage to the components.
5.Installation Manual & Schematic:
ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.
For other payment method, please contact us at orders@icstation-team.com for more details.