PBL-20S is a Five-Pointed Star Breathing Light DIY Kit. It is a simple breathing light and Its brightness automatically fades.
1>.20pcs highlight LED
2>.Perfect simple circuit
4>.Comes with battery box
1>.Product Name:PBL-20S Five-Pointed Star Breathing Light DIY Kit
3>.Work Voltage:DC 4.0V~6.0V
5>.Power Type:Battery Box
1>.Training welding skills
1>.User needs to prepare the welding tool at first.
2>.Please be patient until the installation is complete.
3>.The package is DIY kit.It need finish install by user.
4>.The soldering iron can't touch the components for a long time(1.0 second), otherwise it will damage the components.
5>.Pay attention to the positive and negative of the components.
6>.Strictly prohibit short circuit.
7>.User must install the LED according to the specified rules.Otherwise some LED will not light.
8>.Install complex components preferentially.
9>.Make sure all components are in right direction and right place.
10>.Check that all of the LED can be illuminated.
11>.It is strongly recommended to read the installation manual before starting installation!!!
12>.Please wear anti-static gloves or anti-static wristbands when installing electronic components.
6.Installation Steps(Please be patient install!!!):
Step 1: Install 20pcs SMD 0805 Red LED at LED1-LED20. It is negative pole for LED where there are green mark on LED pin. The ellipse pad is negative pole on PCB that shall connect to negative pole for LED.
Step 2: Install 1pcs SOP-8 LM358 at U1.There is a smaller dot on one corner of the IC and there is a white dot on PCB where the IC can place on.These two marks are corresponding to each other and are used to specify the installation direction of the IC.
Step 3: Install 1pcs SOT-23 S8050 Transistor at Q1.
Step 4: Install 1pcs 22ohm SMD 0805 Resistor at R5.
Step 5: Install 1pcs 33Kohm SMD 0805 Resistor at R6.
Step 6: Install 3pcs 47Kohm SMD 0805 Resistor at R1,R2,R4.
Step 7: Install 1pcs 100Kohm SMD 0805 Resistor at R3.
Step 8: Install 1pcs 47uF SMD 0805 Capacitor at C1.
Step 9: Install 1pcs 9V Battery Box.
Step 10: Connect to power supply and enjoy the effect.
7. Diagram and Components List
ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.
For other payment method, please contact us at firstname.lastname@example.org for more details.