It is a 5A step-down module.There are two modes of constant voltage and constant current. It can be used as a step-down module,battery charger or high-power LED constant current drive module.
1).Its conversion efficiency is high.
2).It supports short circuit protection.
3).It supports over-temperature protection.
4).It has a current limiting protection function,even if the output is short-circuited,the module will not be burned out.
5).It has two modes of constant voltage and constant current.
6).It has a charging indicator to show the working status.
1).Product Name:5A Step-down Module
2).Input Voltage:DC 4V~38V
3).Output Voltage:DC 1.25V~36V
1).Used as an ordinary step-down module with over-current protection capability:
1.1).Adjust the constant voltage potentiometer to make the output voltage reach the voltage value you want.
1.2).Use a multimeter to measure the output short-circuit current with a 10A current file (directly connect the two test leads to the output terminal),and adjust the constant current potentiometer to make the output current reach the predetermined overcurrent protection value.(For example,the current value displayed by the multimeter is 4A,then the maximum current when you use the module can only reach 4A,when the current reaches 4A,the red constant voltage constant current indicator will be on,otherwise the indicator will be off)
1.3).When used in this state,since the output terminal has a current sampling resistor of 0.05 ohm,there will be a voltage drop of 0~0.3V after the load is connected.This is a normal phenomenon! This voltage drop is not pulled down by your load,but dropped to the sampling resistor.
2).Used as a battery charger:
2.1).The module without the constant current function cannot be used to charge the battery.Because the voltage difference between the exhausted battery and the charger is large,the charging current is too large and the battery is damaged.Therefore,the battery must be constant at the beginning.Current charging,when the charging reaches a certain level,it will automatically switch back to constant voltage charging.
2.2).Determine the floating voltage and charging current of the rechargeable battery you need;(If the lithium battery parameter is 3.7V/2200mAh,then the floating voltage is 4.2V and the maximum charging current is 1C,which is 2200mA)
2.3).Under no-load conditions,the multimeter measures the output voltage and adjusts the constant voltage potentiometer to make the output voltage reach the float voltage;(if charging a 3.7V lithium battery,adjust the output voltage to 4.2V)
2.4).Use a multimeter to measure the output short-circuit current with a 10A current file (directly connect the two test leads to the output terminal),and adjust the constant current potentiometer to make the output current reach the predetermined charging current value;
2.5).The charging current of the lamp is 0.1 times the charging current;(The current of the battery is gradually reduced during the charging process,and gradually changes from constant current charging to constant voltage charging.If the charging current is set to 1A,then when the charging current is set When it is less than 0.1A,the blue light is off and the green light is on,and the battery is fully charged at this time)
2.6).Connect the battery and charge it.
2.7).When operating this method,the input terminal is connected to the power supply,and the output terminal is not connected to the battery without load.
3).Used as a high-power LED constant current drive module:
3.1).Determine the operating current and maximum operating voltage you need to drive the LED;
3.2).Under no-load conditions,the multimeter measures the output voltage and adjusts the constant voltage potentiometer to make the output voltage reach the highest LED operating voltage;
3.3).Use a multimeter to measure the output short-circuit current at 10A current level,and adjust the constant current potentiometer to make the output current reach the predetermined LED operating current;
3.4).Connect the LED and test the machine.
3.5).Note that when operating this method,the input is connected to the power supply,and the output is not connected to the LED light when there is no load.
1).Red status indicator:
1.1).Constant current state:Light ON
1.2).Constant current state:Light OFF
2).Blue charging indicator
3).Green charging indicator:
1pcs 5A Step-down Module
First we should say that ICStation doesn't accept any form of pay on delivery.Items used to be shipped after receiving the order info and payment.
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) West Union
We know that some of you do not have the Paypal account.
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$500. The bank will charge about US$60 for the transfer fee if we do the payment in these ways.
For other payment method, please contact us at email@example.com for more details.
1. Yanwen / YunExpress / 4PX / China Post Airmail Service
(1) Due to the high risk of package lost recently, we have to stop using the free shipping way these days. Hope for your kind understanding! And the $5 is for tracking number and delivery insurance ^0^ Enjoy order from us.
Free Shipping for all orders over $20 ^0^ (with free tracking number and delivery insurance fee)
(2) Shipping time
Shipping time is 7-20 business days to most of countries; please view below table for exactly shipping time to your location.
7-15 working days to: Most of Asia countries
10-16 working days to: USA , Canada , Australia , UK , Most of Europe countries
13-20 working days to: Germany , Russia
18-25 working days to: France , Italy , Spain , South Africa
20-45 working days to: Brazil , Most of South America countries
2. DHL/FedEx Express
(1)Shipping Fee: Free for the order which meet the following requirements
Total price of the order >= 200USD or Total weight of the order >= 2.2KG
When the order meets to one of the above requirement, it will be shipped for FREE via EMS/DHL/UPS Express to below country.
Asia: Japan , South Korea , Mongolia . Malaysia , Singapore , Thailand , Vietnam , Cambodia , Indonesia , Philippines
Oceania: Australia , New Zealand , Papua New Guinea
Europe& America: Belgium, Britain, Denmark, Finland, Greece, Ireland, Italy, Luxembourg, Malta, Norway, Portugal, Switzerland, Germany, Sweden, France, Spain, USA, Austria, Canada
Note: Shipping Fee to other countries, please contact orders@ICStation.com
(2) Shipping Time & Delivery Time
Because the package would be returned to the sender if it had not been signed by the receiver , please pay attention to the arriving time of the package.
1) APO and PO Box Addresses
1) Delivery Time of mixed orders with items in different Shipping Status should be calculated using the longest estimate times listed.
2) Chinese Holiday Reminder: During annual Chinese holidays, services from certain suppliers and carriers may be affected, and delivery for orders placed around the following times may be delayed by 3 - 7 days: Chinese New Year; Chinese National Day,etc.
3) Once your order is shipped, you will receive an email notification from icstation.com
4) Track the order which with tracking number via below links: