Voice Playback Module, Music Player Voice prompts Voice Broadcast Device, MP3 Trigger Amplifier Class D 5W 64MBit Flash for Arduino

Description:
  DY-SV8F is an intelligent voice module developed by the division independently. It integrates I/O subsection triggering, UART serial port control, ONE_line single bus serial port control.

  Onboard 5W Class D amplifier circuit and can directly drive 4ohm 3~5W speakers.Support MP3, WAV decoding format. Support 64Bbit (8Mbyte) Flash memory. It can connect the computer to update audio files via USB cable.

Features:
1>. Support MP3 and WAV decoding format.
2>. Support sampling frequency (KHz) : 8/11.025/12/16/22.05/24/32/44.1/48.
3>. 24-bit DAC output, dynamic range support 90dB, SNR support 85dB.
4>. Support 64Bbit(8Mbyte) Flash memory.
5>. Support UART serial port control voice broadcast function. It can control playback, pause, selections, turn up and down volume and other functions, the largest selection of 65535 songs. The baud rate is 9600 bit/s.
6>. Support I/O trigger function, 8bit I/O ports can trigger 8 musics or 8 I/O combinations to trigger 255 songs.
7>. Support One_line single bus serial port control, which can control playback, pause, selection, turn up and down volume and other functions.
8>. Support 3 configuration I/O for mode selection to make 7 work modes.
9>. Built-in 5W Class D amplifier circuit and can directly drive 4ohm 3~5W speaker.

Parameters:
  Work Voltage:DC 5V
  Working Temperature range:-20℃~85℃
  Working Humidity range:0%-95%RH
  Size :35x35x4.5mm

User Manual:

★Support MP3 and WAV Decoding Format: onboard 64Mbit (8M bytes) Flash storage, can be connected to a computer via a USB cable to update Flash storage audio files
★UART Serial Port Control Voice Broadcast Function: With control playback, pause, song selection, volume addition and subtraction functions. Up to 65535 tracks can be selected, and the baud rate is 9600 bit/s
★24-bit DAC output, dynamic range supports 90dB, signal-to-noise ratio supports 85dB
★Support 64Bbit(8Mbyte) Flash memory, no memory card required
★Built in 5W Class D amplifier circuit and can directly drive 4ohm 3~5W speaker. for more details, please read the user manual.(Control + F to search it)

The number on the corresponding DIP switch:
CON1-Dialed to the digital end is low level (0), dialed to the ON end is high level (1)
CON2-Dialed to the digital end is low level (0), dialed to the ON end is high level (1)
CON3-Dialed to the digital end is low level (0), dialed to the ON end is high level (1)

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 

We are PayPal Verified 

2)  Bank Transfer / Wire Transfer / T/T

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.