1017
Home > Wireless Module > Other > ESP8266 ESP-01 Remote Serial Port WIFI Transceiver Wireless Module AP+STA

ESP8266 ESP-01 Remote Serial Port WIFI Transceiver Wireless Module AP+STA

4928
5 3
$3.19 $2.46
Quantity5+
Price$2.35
Time Remaining:
- OR - Add to Wish List

Cheaper Buy Together

$6.29-6%Bundled Price:$5.91

Description:

The advantage of modules:
1.Low price
2.The smallest by 11 * 10 mm or so,Embedded in any convenient products
3.Powerful internal run LWIP protocol
4.Supports three modes: AP, STA and AP + STA coexistence pattern
5.Improve the clean efficiency of the AT command, let you develop more simple.

Download Material


AT+CWQAP

AT+CWQAP;Exit links with AP
Testing Instruction :
response
OK
AT+CWQAP=?
 
illustrated
None
execute instruction :
response
OK
AT+CWQAP
 
illustrated
None

AT+CWSAP
AT+CWSAP Setting up the AP mode parameters
test instruction response  
  illustrated  
Queries   instruction : response Returns the current AP parameters
AT+CWSAP? +CWSAP; < ssid >,< pwd >,< chl >,< ecn >
  illustrated None
setup instruction : response OK
AP+CWSAP= Or
< ssid >,< pwd >,< chl >,< ecn > EPPOR
  illustrated instruction parameters :
< ssid > string parameter , Access Point   Name .
< pwd > string parameter , Password up to 64 bytes ASCII
< chl > Channel Number
< ecn > cipher mode
0 OPEN
1 WEP
2 WPA_PSK
3 WPA2_PSK
4 WPA_WPA2_PSK
illustrated This set of instructions is only effective after AP mode to open

TCP/IP toolkit AT command
Command
Description
AT+CIPSTATUS
Get the connection status
AT+CIPSTART
To establish a TCP connection or registered UDP port number
AT+CIPSEND
send data
AT+CIPCLOSE
Close TCP or UDP
AT+CIFSR
Get the local IP address
AT+CIPMUX
Start multiple connections
AT+CIPSERVER
Configured as a server
AT+CIPSTATUS
AT+CIPSTATUS Get the connection status
Testing Instruction
response
OK
 
illustrated
None
Executes   I nstruction
response
Returns the current module connection state and connection parameters
AT+CIPSTATUS
STATUS :< stat >
 
+CIPSTATUS; < id > , < type > , < addr > , < port > , < stat >
 
OK
 
 
 
illustrated
Response Value Description:
< id > connection id number 0-4
< type > string parameter ,type TCP or UDP
< addr > string parameter ,IP address
< port > Port Number

AT+CIPSTART
AT+CIPSTART To establish a TCP connection or registered UDP port number
Testing Instruction
response
+CIPSTART:( < type > A list of values ),( < IP address > Range),( < port > Range)
AT+CIPSTART=?
OK
 
 
 
illustrated
None
Set command
response
OK-Format correct and the connection is successful
1) single   way   connection
Or
(+CIPMUX=0)
ERROR- Failure
AT+CIPSTART=
Or
< type > , < addr > , < port >
ALREAY CONNECT,Connection has been
 
 
2) Multiple connections
 
(+CIPMUX=1)
 
AT+CIPSTART=
 
< id >< type > , < addr > ,
 
< port >
 
 
 
 
 
 
 
 
 
 
illustrated
Command parameters:
< id > 0-4 connection id number  
< type > string parameter ,Indicates that the connection type, ” TCP ” established tcp connection .
“ udp ” established UDP connection .
< addr > string parameter ,The remote server IP address.
< port > Remote server port number
 
illustrated
No. 0 connections can dient or server connections, the other can only be used to connect to a remote server id
AT+CIPSEND
AT+CIPSEND send data
Testing Instruction :
response
OK
AT+CIPSEND=?
 
illustrated
None
setup instructions :
response
Response Returns the specified length of data.
1) single   way   connection
After receiving the instruction to wrap return ">", and then begin to receive serial data, send data when the data length full lenght.
(+CIPMUX=0)
If you do not establish a connection or connection is disconnected, return ERROR.
AT+CIPSTART= < lenght >
if the data is sent successfully,return to SEND OK.
 
 
 
 
 
 
 
 
 
 
2)Multiple connections
 
(+CIPMUX=1)
 
AT+CIPSTART=
 
< id > , < lenght >
 
 
 
 
 
 
 
 
illustrated
 
instruction parameters :
< id > Required for the transport connection id number.
< lenght > numeric argument ,Indicates that the length of the send data
AT+CIPCLOSE
AT+CIPCLOSE Close TCP or UDP
Testing Instruction :
response
OK
AT+CIPCLOSE=?
 
illustrated
None
Set command:
response
If the input is correct, return OK
Multiple connections
Without the connection, returns the Link is not
AT+CIPCLOSE= < id >
If you turn off No. 0 connection, and the connection for the server, it returns Cant close (closed 0 need to restart the server connection)
 
 
 
illustrated
command parameter:
< id > Need to close the connection id
Executes Instruction:
response
If the input is correct, return OK
single   way   connection
Without the connection, returns the
AT+CIPCLOSE
ERROR
 
If you want to shut down the server, it returns we must restart (connection need to restart)
 
illustrated
None
illustrated
Closed state is unlink
AT+CIFSR
AT+CIFSR Get the local IP address
Testing Instruction :
response
OK
AT+CIFSR=?
 
illustrated
None
Executes Instruction:
response
+CIFSR:<IP address>
AT+CIFSR
OK
 
Or
 
ERROR
 
illustrated
return response :
<IP address>-The current IP address of the machine(station)
AT+CIPMUX
AT+CIPMUX Start multiple connections
query directives :
response
+CIPMUX:<mode>
AT+CIPMUX?
OK
 
 
 
 
 
illustrated
None
Set command:
response
OK
AT+CIPMUX=<mode>
If you already are connected, it returns
 
Link is builded
 
 
 
 
 
illustrated
command parameter
<mode>
0 single   way   connection   mode
1 Multiple connection mode
 
Executes Instruction
response
None
 
illustrated
None
AT+CIPSERVER
AT+CIPSERVER Configured as a server
Executes Instruction
response
Automatically create a server monitor server after opening
AT+CIPSERVER=
OK
<mode>[,<port>]
If 0 connection being used, it returns the Link is builded
 
Close need to restart the server
 
 
 
illustrated
command parameter:
<mode>
0 Close the server mode
1 Open the server mode
<Port> port number, the default value is 333



2.AT command classification
Classification
instruction format
 
command function
TEST command
AT+<X>=?
This command is used to query or set command to set the parameters of the internal procedures and its value range.
Query command
AT+<X>?
This command returns the current value of the parameter.
Set command
AT+<X>=<...>
This command is used to set the user custom parameter values.
 
Execute Command
AT+<X>
This command is used by the module to perform internal program control functions varying parameters immutable.

Note:
1) not every AT command all have these four categories command,
2)later instruction [ ] the data to the default value, do not fill or may not appear,
3) 57600 baud rate.

3.Basic AT command
Command
Description
AT+RST
Restart the module
3.1. AT+RST
AT+RST Restart the module
Execute Command :
response
OK
 
AT+RST
 
illustrated
None
4.WIFI function AT command
Command
Description
AT+CWMODE
Select WiFi application mode
AT+CWJAP
Join AP
AT+CWLAP
Lists currently available AP
AT+CWQAP
Exit connection with the AP
AT+CWSAP
Setting up the AP mode parameters
4.1. AT+CWMODE
AT+CWMODE Select WiFi application mode
TEST command
response
+ CWMODE: (<mode> value list)
AT+CWMODE= ?
OK
 
 
 
illustrated
The response returns the current what model can support
Query command
response
+ CWMODE: <mode>
AT+CWMODE ?
OK
 
illustrated
In response to the current in which model
Set command
response
OK
AT+CWMODE=<mode>
 
illustrated
This instruction should be come into force after the restart (AT + RST)
command parameter<mode> :
Station model
AP model
AP and Station mode
4.2. AT+CWJAP
AT+CWJAP Join AP
Query command
response
+CWJAP:<ssid>
AT+CWJAP?
OK
 
 
 
illustrated
Response returns the currently selected AP
Set command
response
OK or ERROR
 
AT+CWJAP=<ssid>,<pwd>
 
 
illustrated
command parameter:
<ssid>String parameters, access point name
<pwd>String parameters, the password up to 64 bytes
ASCII

4.3. AT+CWLAP
AT+CWLAP Lists currently available AP
Execute Command :
response
Successful, returns the AP list
AT+CWLAP
+CWLAP:<ecn>,<ssid>,<rssi>,[,<mode>]
 
 
 
OK
 
Or
 
Fails, the return .
 
ERROR
 
illustrated
Response Parameter Description :
<ecn> 0 OPEN
1 WEP
2 WPA_PSK
3 WPA2_PSK
4 WPA_WPA2_PSK
<ssid>String parameters, access point name
<rssi>Signal strength
<mode>0 Manual connection
1 automatic connection

 

Quantity5+
Price$2.35

Pics & Videos

Tested by Our Partner PDAControl:

Feedback

By
Rating: [5] 5 of 5 Stars! Date Added: 2017-07-05 21:10:56
Very well protected packaging,works very well with my arduino uno.
By
Rating: [5] 5 of 5 Stars! Date Added: 2015-07-01 07:00:26
Пришёл в Латвию за две недели.Рабочий. https://drive.google.com/file/d/0B_ojaSpCbPXYSGV4X0d6UmJpR0U/view?usp=sharing
By
Rating: [5] 5 of 5 Stars! Date Added: 2015-05-26 04:15:38
One of the great product for IOT, which gives huge opportunity to explore many things, This tiny module less than $5 module can be used as a standalone device for controlling devices without going for a microcontroller to support it, thanks for the lua firmware, I bought this product without any knowledge about it , icstation provides the needed materials to get start with this prodcut, I am a returning customer for icstation, you guys doing an awesome job, Thanks for the fastest shipping and attend all my queries . I would recommend my fellow electronic lovers to take a look into your site

First we should say that ICStation doesn't accept any form of pay on delivery.Items used to be shipped after receiving the order info and payment.

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 



We are PayPal Verified 

 

2) West Union


 

We know that some of you do not have the Paypal account. 

But please take it easy. You can use West Union payment method.
Learn more at West Union at www.westernunion.com.
 
For the receiver info, please contact us at orders@icstation.com.
 
3) Bank Transfer / Wire Transfer / T/T
 

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$500. The bank will charge about US$60 for the transfer fee if we do the payment in these ways. 

For other payment method, please contact us at orders@icstation.com for more details.

1. Hongkong / Sinapore Airmail

(1) Due to the high risk of package lost recently, we have to stop using the free shipping way these days. Hope for your kind understanding! And the $3 is for tracking number and delivery insurance ^0^ Enjoy order from us. 

Free Shipping for all orders over $20 ^0^ (with free tracking number and delivery insurance fee)

(2) Shipping time 
Shipping time is 7-20 business days to most of countries; please view below table for exactly shipping time to your location. 

7-15 working days to: Most of Asia countries
10-16 working days to: USA , Canada , Australia , UK , Most of Europe countries
13-20 working days to: Germany , Russia
18-25 working days to: France , Italy , Spain , South Africa
20-45 working days to: Brazil , Most of South America countries

2. EMS/DHL/UPS Express

(1)Shipping Fee: Free for the order which meet the following requirements
Total price of the order >= 200USD or Total weight of the order >= 2.2KG

When the order meets to one of the above requirement, it will be shipped for FREE via EMS/DHL/UPS Express to below country. 
Asia: Japan , South Korea , Mongolia . Malaysia , Singapore , Thailand , Vietnam , Cambodia , Indonesia , Philippines 
Oceania: Australia , New Zealand , Papua New Guinea 
Europe& America: Belgium, Britain, Denmark, Finland, Greece, Ireland, Italy, Luxembourg, Malta, Norway, Portugal, Switzerland, Germany, Sweden, France, Spain, USA, Austria, Canada
Note: Shipping Fee to other countries, please contact orders@ICStation.com

(2) Shipping Time
Shipping time is 3-5 working day (about 1 week) to most of countries. 

Because the package would be returned to the sender if it had not been signed by the receiver in 2-3 day (DHL) or 1 week (EMS,) or 2 weeks (Registered Email), please pay attention to the arriving time of the package. 

Note:

1) APO and PO Box Addresses

We strongly recommend that you provide a physical address for order delivery. 
Because that DHL and FedEx are unable to deliver items to APO or PO BOX addresses. 
 
2) Contact Phone Number
Receivers' contact phone number is required by express shipping agency for the package delivery. Please provide us with your latest phone number.


3. Note
1) Delivery Time of mixed orders with items in different Shipping Status should be calculated using the longest estimate times listed. 
2) Chinese Holiday Reminder: During annual Chinese holidays, services from certain suppliers and carriers may be affected, and delivery for orders placed around the following times may be delayed by 3 - 7 days: Chinese New Year; Chinese National Day,etc. 
3) Once your order is shipped, you will receive an email notification from icstation.com
4) Track the order which with tracking number via below links:

Registered Airmail: www.17track.net/en

Customers who bought this product also purchased

ICStation TDA2030A DIY Kit 2.0 15W+15W Dual Channel Audio Amplifier Board Power Amplifier
$3.83
$4.79
Nodemcu LUA WiFi Internet Network Development Board Module ESP8266 ESP-12F
$6.61
$8.59
Water Flow Hall Sensor Switch Meter Flowmeter Counter
$3.75
$5.35
30
Water Flowmeter High Precision Pure Water Machine Flow Meter Coffee Machine Flow Small Flow Sensor
$3.42
$4.89
30
Charging Protection Board PCB Dedicated For 3pcs 18650 6A Lithium Battery
$2.43
$3.15
100kg Thin Film Pressure Sensor Force Sensor Diameter 16mm for Arduino
$8.20
$10.65
24
500g-10kg RFP-602 Thin Film Pressure Sensor Force Sensor D10mmxL49mm for Arduino
$4.97
$6.45
24
Smart Car Robot Plastic Tire Wheel + DC Gear Motor 3v 5v 6v
$3.59
$4.79
26
9V 2-Channel Relay Module with Optocoupler Low Level Triger for Arduino
$1.72
$3.82
56
High Power Wifi Relay Switch Module Inching Mode Phone Remote Control DC 12V 6.4x3.1x2.3cm for Smart Home
$8.00
$10.39
24
White Bakclight SMD LED Pin Connection Metal Pin 3.0V 15mA For GDC03077 LCD
$1.39
$1.99
30
ICStation Arduino Xbee Sensor shield
$7.31
$16.25
56

Your Recent History

ESP8266 ESP-01 Remote Serial Port WIFI Transceiver Wireless Module AP+STA
$2.46
$3.19