DY-AP3001 is a high-power mono Bluetooth audio module.Single channel audio signal output.Built-in amplifier module therefore it can connect to loudspeaker directly.It is ideal for DIY speakers and transponders.
1>.Width work voltage range
2>.Applicable multiple type speakers
3>.Support enabled/disabled output
1>.Product name:DY-AP3001 Digital Amplifier Module
3>.Work Voltage:DC 8V-24V
4>.Work Mode:Class D
7.1>.Output power 30W at 16V 4ohm
7.2>.Output power 20W at 12V 4ohm
7.3>.Output power 10W at 12V 8ohm
7.4>.Output power 15W at 16V 8ohm
7.5>.Output power 25W at 24V 8ohm
8.1>.4ohm at 8V~16V
8.2>.8ohm at 8V~24V
1>.Choose the right speaker and connect as shown in wiring diagram.
2>.Connect to right power supply from input terminal.
1>.Pay attention to static electricity protection.
2>.Recommended power supply voltage DC 8~24V.Module will be damaged if input voltage is more than 26V.
3>.Input voltage can not more than 16V if connect 4ohm speaker.
4>.Input voltage can not more than 24V if connect 8ohm speaker.
5>.It is recommended to use a power supply of 2A or higher.
6>.The positive and negative poles of the input power supply cannot be reversed Otherwise the module will be damaged.
7>.Please don’t use too long wires to avoid signal interference.
8>.It is recommended to use a speaker above 30W to avoid speaker damage.
9>.Please read use manual and description before use.
7.Frequently asked questions:
1>.Speaker ‘pu~’ after power ON and then no response.
1.1>.Try to reduce the input voltage to restart.
1.2>.Check if the speaker impedance is 4ohm~8ohm.Maybe the impedance is too small.
1.3>.Check power.Make sure its input current is more than 2A.
2>.There is noise during playback.
2.1>.Change the sound source and check if the sound source has its own noise.
2.2>.Use shielded audio cable.
2.4>.Change power adapter.
3>.Module get hot and smoke.
3.1>.Speaker power is too small.Change high power speakers or reduce signal input.
1pcs DY-AP3001 Digital Amplifier Module
ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.
For other payment method, please contact us at firstname.lastname@example.org for more details.