SMD LED Microcontroller Flashing Light DIY Kit, DC 5V Heart Shaped Red LED Electronic Soldering Practice Kit

1.Description:
   This kit consists of a combination of 32 LEDs that emit multi state cyclic flashing light. Eight 10 pins are used to control the flashing of 32 LEDs according to the program settings. S1 is the start stop switch, and the circuit defaults to working state after power is turned on. When S1 is turned off, the "heart tip" LED is in breathing state standby mode. Press S1 at any time, and the circuit enters standby mode. At this time, the "heart tip" LED is in breathing state flashing, and then press S1 circuit to enter working state again.

2.Parameter:
  1>.Work Voltage: DC 5V
  2>.Work Temperature: -25℃~85℃
  3>.Work Humidity: 5%~95%RH
  4>.Size: 60*50*10mm

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 

We are PayPal Verified 

2)  Bank Transfer / Wire Transfer / T/T

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.