It is a flash Christmas tree kit consists of three circuit board, allows 36 LED flash alternately, showing a Christmas tree in the space of three-dimensional profile (the night environment has better viewing).
1>.36pcs highlight RGB full color LED
2>.14 kinds of display effects
3>.Photo sensor automatically adjusts LED brightness
4>.Toggle Switch control flashing mode
5>.5mm/10mm big LED
6>.Perfect simple circuit
1>.Work Voltage:DC 4.5V~5.5V
3>.Power Type:Mini USB
4>.Work Module:Switch Control
1>.Christmas rainbow gradient mode
2>.Meteor impact mode
3>.Simulate Starlit mode
4>.All slow color changing
5>.Up and down meteor mode
6>.Aurora color gradient mode
7>.Middle color changing mode
8>.Similar color slow changing mode
9>.Multi-color small meteor crossing mode
10>.Similar color diffusion in the middle mode
11>.Random color lightning mode
12>.Rainbow color flashing mode
13>.Meteor across color gradient mode
14>.Meteor back and forth across mode
1>.Training welding skills
1>.User needs to prepare the welding tool at first.
2>.Please be patient until the installation is complete.
3>.The package is DIY kit.It need finish install by user.
4>.The soldering iron can't touch the components for a long time(1.0 second), otherwise it will damage the components.
5>.Pay attention to the positive and negative of the components.
6>.Strictly prohibit short circuit.
7>.User must install the LED according to the specified rules.Otherwise some LED will not light.
8>.Install complex components preferentially.
9>.Make sure all components are in right direction and right place.
10>.Check that all of the LED can be illuminated.
11>.It is strongly recommended to read the installation manual before starting installation!!!
12>.The default code inside the chip, the function is more abundant,So please do not update the code inside arbitrarily!!!
7.Installation Steps(Please be patient install!!!):
Step 1: Identify the LED pins. The rectangular pad connects to the longest LED pin.The pins of other LED are inserted into the corresponding pads in sequence.
Step 2: Place LED on pad and then bend LED and keep about 2mm distance between PCB edge and LED body.And then fixed LED pin.
Step 3: Install 1pcs 10Kohm Metal film resistor at R1 and 1pcs Photoresistor at RP on the bigger PCB.
Step 4: Install 1pcs MINI USB Female Socket at J1 on the bigger PCB.
Step 5: Install 1pcs DIP-16 IAP15W413AS-35I at U1 on the bigger PCB.There is a dot on one corner of the IC and there is a mark on PCB where the IC can place on.These two marks are corresponding to each other and are used to specify the installation direction of the IC.
Step 6: Install 1pcs Toggle Switch at S1 on the bigger PCB.
Step 7: Install 12Pin Male Pin at black area on 2pcs the smaller PCB.
Step 8: Fix 3pcs PCB.
Step 9: Install 1pcs 10mm RGB LED at the top.
Step 10: Connect to power supply and enjoy the effect.
ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:
1) Paypal Payment
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account).
We are PayPal Verified
2) Bank Transfer / Wire Transfer / T/T
Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.
For other payment method, please contact us at firstname.lastname@example.org for more details.