PWM Pulse Frequency Signal Generator Speed Regulator DC 9V 12V 24V 48V 500W 12A PWM Motor Driver LED Display Module

1.Description:

• ZK-BMG is a High-power PWM DC motor governor.
• It can adjusts the motor speed by adjusting the duty cycle of the output signal.
• It can also adjust the output frequency to match the frequency of the output signal to the motor frequency, allowing the motor to work more stably.

2.Features:

•     Support ON/OFF output
•     Soft start function
•     Support set duty cycle
•     Support set frequency
•     Adjustable digital encoder 
•     Instrument case
•     Support reverse connection protection
•     Support parameter memory function
•     Set default ON/OFF state

3.Parameters :

•     Product Name:ZK-BMG High-Power PWM DC Motor Speed Controller 
•     Product Number:ZK-BMG
•     Working Voltage:DC 9V-60V 
•     Rated Current:12A
•     Peak Current:20A
•     Power:500W(Max)
•     Work Frequency:1KHz-99KHz(Default 20KHz)
•     Frequency Accuracy:1%
•     Frequency Resolution:1KHz
•     Duty Cycle:0%-100%
•     Duty Cycle Resolution:1%
•     Work temperature: -40~85℃
•     Working Humidity:0%-95%RH
•     Size:79*43*44mm

4.Potentiometer introduction:
    1.Long press means need keep press for more than 10second.
    2.Default display duty cycle.
    3.Normal display mode:
        3.1>.Short press potentiometer:Turn ON/OFF output signal.
        3.2>.Long press potentiometer:Enter parameter set mode.
        3.3>.Rotate potentiometer clockwise:Increase duty cycle value.
        3.4>.Rotate potentiometer counterclockwise:Decrease duty cycle value.

    4.Parameter set mode:
        4.1>.Short press potentiometer:Select parameter.Switch select Power-ON ON/OFF State,Lower Limit Value of duty cycle,Upper Limit Value and Output Frequency.Power-ON ON/OFF State is default output state when power ON. Lower Limit Value display in ‘L’ and 2bit number.Upper Limit Value display in ‘H’ and 2bit number or ‘100’.Output Frequency display in ‘F’ and 2bit number.
        4.2>.Long press potentiometer:Save parameter and quit set mode to normal display mode.
        4.3>.Rotate potentiometer clockwise:Increase set value.
        4.4>.Rotate potentiometer counterclockwise:Decrease set value.

    5.STOP pads inside:It is used to connect to button to turn ON/OFF output if user need control output by another button or controller.Note: It needs connect to lockless button but not self-locking button.

5.Use Steps:
    1>.Connect right work voltage(Note:don’t connect load before set parameters).
    2>.Short press potentiometer to turn OFF output.
    3>.Long press potentiometer enter into parameter set mode.
    4>.Short press potentiometer to select set parameters.
    5>.Rotate potentiometer to set parameter value.
    6>.Set another two parameters as step3 and step4.
    7>.Long press potentiometer to save parameters and quit set mode to normal display mode.
    8>.Connect load as wiring diagram.
    9>.Short press potentiometer to turn ON output.

6.Application:

• Drive motor
• Light brightness control
• Speed control
• Signal generator

7.Package Listing:
    1pcs ZK-BMG High-Power PWM DC Motor Speed Controller 

ICStation doesn't accept any form of pay on delivery. Items used to be shipped after payment. Below are the payment methods we can accept at the moment:

1) Paypal Payment

PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at icstation.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card , or E-check (i.e. using your regular Bank Account). 

We are PayPal Verified 

2)  Bank Transfer / Wire Transfer / T/T

Bank Transfer / Wire Transfer / T/T payment methods are accepted for orders which the total price is up to US$300. The bank will charge about US$50 for the transfer fee if we do the payment in these ways. Feel free to contact us for bank payment details if you need pay via bank.

For other payment method, please contact us at orders@icstation-team.com for more details.