It is a infrared sensor switch.After connecting to the power supply,the sensor switch will act after the sensor is swept by hand.It is mainly used to control the LED lights to turn on and off.
1).The probe of the external induction switch is made of environmentally friendly aluminum alloy,which is beautiful and durable.The probe has high corrosion resistance after oxidation treatment,and is suitable for use in various humid environments.
2).The sensor window adopts a special filter and a high-speed signal processing chip.It is not afraid of interference from various lights and sunlight.It can be used normally in a strong light environment,and the sensing distance is unchanged.
3).The hand scan is sensitive,and the hand scan detection program has been used for a long time,and the detection error is zero.
4).Small size,light weight,easy to install and fix,high load power,low heat when working at full load.
1).Product Name:Infrared Sensor Switch
2).Working Voltage:DC 8-24V
4).Working Power: 30W(12V) / 60W(24V)
6).Product Function:Wave your hand to turn on (ON);wave your hand again to turn off (OFF).
4.Instructions for Use:
1).First punch holes of the corresponding size for the panel to be installed,then put the sensor probe into the hole,tighten the nut,and put the fixing glue on the nut to avoid vibration and loosening after long-distance transportation after installation.
2).After docking the sensor probe,connect the output terminal of the controller and then the input terminal of the controller when it is not powered on,and then it can be powered on after checking that the wiring is correct.
1).1pcs Infrared Sensor